Abstract:<h2>Abstract</h2><p>In the exploitation of geothermal resources, geothermal single-well heat extraction technology can realize geothermal development without extracting water, which has a wide application prospect. The single-well heat extraction relies on heat conduction between wellbore and reservoir, and heat convection between wellbore and reservoir water. Therefore, the thermal resistance between wellbore and reservoir is an important factor affecting performance of heat extraction. Employing cement with thermal conductive materials in the thermal recovery section of geothermal reservoir is an effective method to enhance heat extraction performance. The study presents a method of producing thermal conductive cement by mixing oil well cement with thermal conductive materials, including graphite, ferrum and copper. Then thermal conductivity and compressive strength tests are carried out, and the influence of thermal conductive material exerted on the thermal conductivity of cement paste is studied. Moreover, relations between porosity and thermal conductivity of cement paste, and relations between particle continuity and thermal conductivity of cement paste are studied by porosity test and SEM scanning. The study demonstrates that with graphite increases, the porosity of cement paste decreases firstly and then increases, and the thermal conductivity of cement paste increases firstly and then decreases; With ferrum increases, the porosity of cement paste decreases, and the thermal conductivity of cement paste increases; With copper increases, the porosity of cement paste decreases, and the thermal conductivity of cement paste increases; As the temperature rises, the thermal conductivity of cement paste decreases gradually; Thermal conductive materials can enhance thermal conduction in cement, and pore would provide thermal insulation; On the condition of improve thermal conductivity, cement with 0.05-0.15 graphite, cement with 0.05-0.20 ferrum and cement with 0.05-0.20 copper can meet requirements. The results of this study provide theoretical guidance for improving the thermal conductivity of cement in geothermal well.</p>

Experimental Study on Thermal Conductivity of Mixed Materials of Sand and Bentonite

SUPPLEMENTARY EXPERIMENT INVESTIGATION ON THERMAL CONDUCTIVITY MEASURED BY STEADY-STATE PLATE METHOD

Experimental Study on Age Effect and Influence Factors of Slag-cement-bentonite's Shear Modulus

Effects of Moisture Content and Dry Bulk Density on the Thermal Conductivity of Compacted Backfill Soil

Thermal Conductivity of Biocemented Graded Sands

Thermally induced volume change behavior of sand–clay mixtures

Experimental Investigations on the State-Dependent Thermal Conductivity of Sand-Rubber Mixtures

Experimental assessment on the thermal and moisture migration of sand-based materials combined with kaolin and graphite

Tailoring the Thermal and Mechanical Properties of Lightweight Cement-Based Composites by Macro and Micro Fillers

On the Structural, Thermal, Electrical and Mechanical Properties of Compacted Bentonite Material

A study on the thermal conductivity of compacted bentonites

Volume Deformation and Hydraulic Conductivity Behavior of Sand-Bentonite Mixtures with Fiberglass Additives under High Temperatures

An Experimental Study on Relationship among Water Sorptivity, Pore Characteristics, and Salt Concentration in Concrete

Study on thermal conductivity of cement with thermal conductive materials in geothermal well

Experimental Study on Thermal Conductivity Measurement of Wet Unconsolidated Porous Media

Experimental Investigation on the Fracture Conductivity Behavior of Quartz Sand and Ceramic Mixed Proppants

Strength and Permeability of Bentonite-Assisted Biocemented Coarse Sand

Thermal–physical properties of selected geomaterials: coal, sandstone and concrete based on basic series and parallel models

Experimental Study and Modelling of the Thermal Conductivity of Sandy Soils of Different Porosities and Water Contents

Effect of Pore Shape on the Thermal Conductivity of Partially Saturated Cement-Based Porous Composites

Experimental study on the effects of composite reinforcement of ionic soil stabilizer and sand on bentonite