Abstract:Extensive research has been conducted on the sulfate attack of concrete structures; however, the need to adopt the use of more sustainable materials is driving a need for a quicker test method to assess sulfate resistance. This work presents accelerated methods that can reduce the time required for assessing the sulfate resistance of mixtures by 70%. Class F fly ash has historically been used in concrete mixtures to improve sulfate resistance. However, environmental considerations and the evolving energy industry have decreased its availability, requiring the identification of economically viable and environmentally friendly alternatives to fly ash. Another challenge in addressing sulfate attack durability issues in concrete is that the standard sulfate attack test (ASTM C1012) is time-consuming and designed for only standard mortars (not concrete mixtures). To expedite the testing process, accelerated testing methods for both mortar and concrete mixtures were adopted from previous work to further the development of the accelerated tests and to assess the feasibility of testing the sulfate resistance of mortar and concrete mixtures rapidly. This study also established criteria for interpreting sulfate resistance for each of the test methods used in this work. A total of 14 mortar mixtures and four concrete mixtures using two types of Portland cement (Type I and Type I/II) and various supplementary cementitious materials (SCMs) were evaluated in this study. The accelerated testing methods significantly reduced the evaluation time from 12 months to 21 days for mortar mixtures and from 6 months to 56 days for concrete mixtures. The proposed interpretation method for mortar accelerated test results showed acceptable consistency with the ACI 318-19 interpretations for ASTM C1012 results. The interpretation methods proposed for the two concrete sulfate attack tests demonstrated excellent consistency with the ASTM C1012 results from mortar mixtures with the same cementitious materials combinations. Metakaolin was shown to improve sulfate resistance for both mortar and concrete mixtures, while silica fume and natural pozzolan had a limited impact. Using 15% metakaolin in mortar or concrete mixtures with Type I/II cement provided the best sulfate resistance.

A new method to determine initial setting time of cement and concrete using plate test

Evaluation of initial setting time of fresh concrete

The Early-Age Drying Shrinkage of Cement-Based Materials with the Same Workability after Temperature Compensation

Setting Times of Early-Age Mortars Determined from Evolution Curves of Poisson's Ratio.

A new method for measuring initial setting time of roller compacted concrete

Assessing setting times of cementitious materials using semi-adiabatic calorimetry

Setting Times of Early-Age Mortars Determined from Evolution Curves of Poisson’s Ratio

Experimental Study of Effects of Factors on RCC Setting Times

Experimental Investigation of Mix Proportions Effects on Roller-Compacted Concrete Properties Using Response Surface Methodology

Resting time effects on flow properties of cementitious materials: a study on self-compacting concrete equivalent mortar made with recycled aggregates

DETERMINATION OF CONCRETE SETTING TIME BASED ON MEASUREMENTS OF DEFORMATION

Prediction Model of Concrete Initial Setting Time Based on Stepwise Regression Analysis

Investigating the Effects of Mixing Time and Mixing Speed on Rheological Properties, Workability, and Mechanical Properties of Self-Consolidating Concretes

Time-dependent rheological analysis of self-consolidating concrete mixtures considering various mixing temperatures

Rapid Assessment of Sulfate Resistance in Mortar and Concrete

Setting Time and Strength Monitoring of Alkali-Activated Cement Mixtures by Ultrasonic Testing

Investigating the influence of cement replacement by high volume of GGBS and PFA on the mechanical performance of cement mortar

Accelerated external sulfate attack: Improved laboratory methods, considering physical and chemical processes

Study of the effect of calcium nitrate, calcium formate, triethanolamine, and triisopropanolamine on compressive strength of Portland-pozzolana cement

Use of Mixture Design Approach for the Optimization and Performance of Cost-Effective Cementitious Quaternary System: Portland Cement–Fly Ash–Silica Fume–Phosphogypsum

Detection of setting time in cement hydration using patch antenna sensor