Abstract:Mass concrete is usually poured in layers. To ensure the interlayer bonding quality of concrete, the lower layer should be kept in a plastic state before the upper layer is added. Ultimately, it will lead to the prediction of concrete setting time as a critical task in concrete pouring. In this experiment, the setting time of concrete in laboratory and field environments was investigated. The equivalent age of concrete at the initial setting was also analyzed based on the maturity theory. Meanwhile, factors affecting the setting time in the field environment were studied by means of multiple stepwise regression analysis. Besides, the interlayer splitting tensile strength of concrete subjected to different temperatures and wind speeds was determined. The results of laboratory tests show that both setting time and interlayer splitting tensile strength of concrete decrease significantly with the increase of air temperature and wind speed. In addition, the equivalent age of concrete at initial setting remains the same when subjected to different temperatures, while it decreases obviously with the increase of wind speed. In the field environment, the equivalent age of concrete at initial setting is greatly different, which is related to the variability of relative humidity and wind speed. The average air temperature and maximum wind speed are the main factors affecting the initial setting time of concrete. Furthermore, a prediction model is established based on the stepwise regression analysis results, which can predict the actual setting state in real-time, and hence controlling the interlayer bonding quality of dam concrete.

DETERMINATION OF CONCRETE SETTING TIME BASED ON MEASUREMENTS OF DEFORMATION

Experimental Measurement and Analysis of Overall Deformation of Concrete at Early-Age

The Early-Age Drying Shrinkage of Cement-Based Materials with the Same Workability after Temperature Compensation

Time-dependent Early-Age Behaviors of Concrete under Restrained Condition

Prediction Model of Concrete Initial Setting Time Based on Stepwise Regression Analysis

Early Age Properties and Cracking Control of Concrete

Setting Times of Early-Age Mortars Determined from Evolution Curves of Poisson's Ratio.

Influence of Early-age Curing Time on Shrinkage of Concrete

Tests and Simulations on Shrinkage of Concrete at Early-Age

Dynamic property determination for early-age concrete

Analytical Prediction and Experimental Research on Shrinkage Cracking of Restrained Early-Age Concrete

Development of Shrinkage and Internal Moisture in Cement Paste,Mortar and Concrete at Early Age

Fracture Toughness And Microstructure Of Concrete At Early-Ages

Effects of controlled permeability formwork on surface properties and early age shrinkage of concrete

Experimental Study of Effects of Factors on RCC Setting Times

EXPERIMENTAL INVESTIGATION ON CONCRETE PERFORATED BRICK WALL SHINKAGE AT DIFFERENT AGES

Setting Times of Early-Age Mortars Determined from Evolution Curves of Poisson’s Ratio

A new method to determine initial setting time of cement and concrete using plate test

Effect of Beginning Curing Time on Early Age Shrinkage of Concrete

Influence of cross-section shape on time-dependent deformation of early-age concrete members

Study on Performance of High Strength Concrete at Early Age