Abstract:The intrinsic stacking fault energy (SFE) of copper under volumetric, longitudinal, and shear strains is investigated using density functional theory (GGA-PBE). Calculations are performed using a copper slab model aligned perpendicular to the (111) intrinsic stacking fault plane. The calculated SFE for unstrained copper is γ = 41 mJ/m2. Results show a strong dependence of γ on strain and distinct behavior for different types of strain: (a) volumetric and longitudinal in the direction perpendicular to the stacking fault, (b) longitudinal parallel to the stacking fault, and (c) shear parallel to the stacking fault. In the first case (a), the SFE decreases monotonically with strain with a slope dγ/dε|ɛ=0 = −0.44 J/m2 and −0.87 J/m2 for volumetric and longitudinal, respectively, and with d2γ/dε2 > 0. In contrast, for longitudinal strain parallel to the stacking fault (b), the SFE dependence exhibits d2γ/dε2 < 0 with a maximum at ε ≈ −0.015. For the case of shear parallel to the stacking fault (c), the SFE is nearly constant at small and moderately large strain, but drops rapidly at very large strain (by a factor of 1/3 for 〈1¯10〉{111} shear at ε = ±0.1). For large 〈112¯〉{111} shear strains, the SFE can either increase or decrease at large strain depending on the sign of the strain. In volumetric or longitudinal (perpendicular to the stacking fault) tension and longitudinal strain in the boundary plane (and for some shear directions), the SFE can become negative, implying a limit on the stability of the fcc crystal structure. The strong dependence of the SFE on strain suggests deep implications for the mechanical properties, microstructural evolution, and dynamic plasticity of metals at high pressure, during severe plastic deformation, and in shock-loading conditions.

Correlation of stacking fault energy with deformation mechanism in Cu–(2, 20)Zn alloys

Effect of stacking fault energy on deformation mechanisms in Cu and Cu-30% Zn alloy with gradient structure obtained by SMAT

Influence of stacking fault energy on defect structures and microhardness of Cu and Cu alloys

Local Lattice Distortion Mediated Formation of Stacking Faults in Mg Alloys

Ductility Sensitivity to Stacking Fault Energy and Grain Size in Cu–Al Alloys

Effects of SMAT Temperature and Stacking Fault Energy on the Mechanical Properties and Microstructure Evolution of Cu-Al-Zn Alloys

Correlation of Grain Size, Stacking Fault Energy, and Texture in Cu-Al Alloys Deformed under Simulated Rolling Conditions

Effect of strain on the stacking fault energy of copper: A first-principles study

Effect of stacking fault energy on nucleation limited plasticity in Cu-Al alloys

The effect of stacking fault energy on the formation of nano twin/HCP during deformation in FCC concentrated solid solution (CSS) alloys

Generalized stacking fault energies of alloys

Effects of stacking fault energy on the deformation behavior of CoNiCrFeMn high-entropy alloys: A molecular dynamics study

Can experiment determine the stacking fault energy of metastable alloys?

Deformation stacking fault probability and dislocation microstructure of cold worked Cu–Sn–5Zn alloys by x-ray diffraction line profile analysis

Stacking fault energy of basal plane for hexagonal closed-packed medium entropy alloy ZrHfTi: Ab initio prediction

Predicting the variation of stacking fault energy for binary Cu alloys by first-principles calculations

Deformation of Fe and Ag Precipitates in Cu Matrix

Effects of stacking fault energy on deformation induced grain boundary relaxation in nanograined Cu alloys

Effect of Stacking Fault Energy on the Grain Structure Evolution of FCC Metals During Friction Stir Welding

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Influence of lattice distortion on stacking fault energies of CoCrFeNi and Al-CoCrFeNi high entropy alloys