Abstract:The generalized stacking fault energy (GSFE) is a material property that can provide invaluable insights into describing nanoscale plasticity phenomena in crystalline materials. Lattice strains have been suggested to influence such phenomena. Here, the GSFE curves for sequential faulting pathways in dual phase [face-centered cubic (fcc) and hexagonal close-packed (hcp)] ${\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{20}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{20}, {\mathrm{Cr}}_{25}{\mathrm{Fe}}_{25}{\mathrm{Co}}_{25}{\mathrm{Ni}}_{25}, {\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{34}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{6}, {\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{30}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{10}$, and ${\mathrm{Cr}}_{10}{\mathrm{Mn}}_{30}{\mathrm{Fe}}_{50}{\mathrm{Co}}_{10}$ high-entropy alloys are investigated on ${{111}}_{\text{fcc}}$ and ${(0002)}_{\text{hcp}}$ close-packed planes using density-functional calculations. The dependence of GSFEs on imposed volumetric and longitudinal lattice strains is studied in detail for ${\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{20}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{20}$ and ${\mathrm{Cr}}_{10}{\mathrm{Mn}}_{30}{\mathrm{Fe}}_{50}{\mathrm{Co}}_{10}$. The competition between various plastic deformation modes is discussed for both phases based on effective energy barriers determined from the calculated GSFEs and compared with experimentally observed deformation mechanisms. The intrinsic stacking fault energy, unstable stacking fault energy, and unstable twinning fault energy are found to be closely related in how they are affected by applied strain. The ratio of two of these planar fault energies can thus serve as characteristic material property. An inverse relationship between the intrinsic stacking fault energy in the hcp phase and the axial ratio ${(c/a)}_{\text{hcp}}$ is revealed and explained via band theory.

Stacking fault energy of basal plane for hexagonal closed-packed medium entropy alloy ZrHfTi: Ab initio prediction

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Generalized Stacking Fault Energy of Al-Doped CrMnFeCoNi High-Entropy Alloy

Computational Thermodynamic and First-Principles Calculation of Stacking Fault Energy on Ternary Co-based Alloys

Towards stacking fault energy engineering in FCC high entropy alloys

Effect of strain on generalized stacking fault energies and plastic deformation modes in fcc-hcp polymorphic high-entropy alloys: A first-principles investigation

Stacking fault energy of face-centered cubic metals: thermodynamic and ab initio approaches

Effects of stacking fault energy on the deformation behavior of CoNiCrFeMn high-entropy alloys: A molecular dynamics study

Highly Pressurized Helium Nanobubbles Promote Stacking-Fault-mediated Deformation in FeNiCoCr High-Entropy Alloy

Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys

Stacking fault induced hardening and grain size effect in nanocrystalline CoNiCrFeMn high-entropy alloy

Molecular dynamics study on the strengthening mechanisms of Cr–Fe–Co–Ni high-entropy alloys based on the generalized stacking fault energy

Enhanced Plastic Deformation Capacity in Hexagonal-Close-packed Medium Entropy Alloys Via Facilitating Cross Slip

Effects of Alloying Elements on the Stacking Fault Energies of Ni58Cr32Fe10 Alloys: A First-Principle Study

First Principles Studies of Stacking Fault Energies in Ternary Magnesium Alloys

Twin boundary migration and reactions with stacking fault tetrahedron in Cu and CoCrCuFeNi high-entropy alloy

Can experiment determine the stacking fault energy of metastable alloys?

Effect of Alloying Compositions on the Stacking Fault Energy and Elasticity of FeNiCrAlCo and FeNiCrAlCu: A First-principles Study for Fe-based High Entropy Superalloy Design

Atomic origins of the plastic deformation micro-mechanisms of γ/γ’ FeCoNiAlTi high-entropy alloys

Design Strength-Ductility Synergy of Metastable High-Entropy Alloys by Tailoring Unstable Fault Energies

Hidden Effects of Negative Stacking Fault Energies in Complex Concentrated Alloys