Abstract:Abstract In this study, a high-throughput fabrication method called laser-assisted direct roller imprinting (LADRI) was developed to lower the cost of nanoimprinting large-area polymer films and to address problems associated with nanoimprinting, namely, microstructural damage and precision in flatness of entire film. With LADRI, the laser directly heats the microstructured surface of the roller mold, which heats and melts the surface of a polymethyl methacrylate (PMMA) film to replicate the microstructures on the mold rapidly. In this study, the effects of laser power density, scanning speed, size of the microstructures, and contact pressure on the replication speed were investigated experimentally. The replication speed increased as the power and scanning speed increased. However, because the film required heating until it filled the entire depth of the microstructure, an appropriate replication speed was necessary. This result was supported by simulation of the temperature distribution inside the mold and the PMMA using transient heat conduction analyses. To demonstrate the applications of LADRI, two different optical surfaces were replicated: an antireflection (AR) structure with conical structures sized several hundred nanometers and a light-extraction structure with a microlens array (MLA) comprising 10 μm lenses, for display and illumination, respectively. The replication degree of the MLA was governed by the contact pressure. Polymer flow simulation indicated that the heat conduction and flow speeds of the melted PMMA surface were comparable within several tens of micrometers. In addition, the reflectivity of the AR structure decreased from 4 to 0.5%, and the light intensity of the light-extraction structure increased by a factor of 1.47.

Continuous injection direct rolling for optical elements with microstructures

Research on Continuous Injection Direct Rolling Process for PMMA Optical Plate

A Framework of a Continuous Injection Direct Rolling Process for Precision Manufacturing Plastic Plates with Patterned Microstructures

Reactive ion beam etching for diffractive optical elements

Theoretical and experimental investigation of an ultrathin optical polymer light guide plate during continuous injection direct rolling

The use of roll-to-plate UV-curing embossing to produce a composite light guide plate

Development and Research Application of Optical Waveguide Microstructure Component Manufacturing Process for Triangle Roller Imprinting

Investigation of an Innovative Roll-to-Plate (R2P) Hot-Embossing Process for Microstructure Arrays of Infrared Glass

Fabrication and evaluation of complicated microstructures on cylindrical surface

Fabrication of the Grating Mold with Micro-Patterns on the Cylindrical Surface by Step Rotating Lithography

Investigation of direct milling of micro-optical elements with continuous relief on a substrate by focused ion beam technology

Direct Fabrication of Seamless Roller Molds with Gapless and Shaped-Controlled Concave Microlens Arrays.

Ultra-precision machining of polygonal Fresnel lens on roller mold

Micro-rolling Forming of Light Extraction Structure on Substrate for LED Chip-on-Board Package

Laser-assisted direct roller imprinting of large-area microstructured optical surfaces

Fabrication of Seamless Roller Mould with Smooth Surface Microstructures by Rotation Lithography and Reflow Process

Injection moulding of mechanical micro-manufactured structures for optically encoding plastic surfaces

Phase Gratings Made with Inductively Coupled Plasma Technology

Characterization of process and machine dynamics on the precision replication of microlens arrays using microinjection moulding

Micro/Meso Roll-to-Plate (R2P) Imprinting Process to Fabricate Micro Channel/Riblet Features

Roller-reversal Imprint Process for Preparation of Large-Area Microstructures