Abstract:The manufacture of inertial-grade and tactical-grade diamond micro electro mechanical systems (MEMS) hemispherical resonator gyroscopes is limited by the manufacturing accuracy of the monocrystalline silicon hemispherical concave mold, on which the gyroscope shell is formed. To solve this problem, this paper presents a new method for micro-ultrasonic machining of microhemispherical molds for resonator gyroscopes using an ultraprecise ceramic entire-ball tool (UCET). To study the wear mechanism of the UCET and the influence of tool wear on the surface integrity and form accuracy of the microhemispherical mold, a mathematical model for the tool wear of micro-ultrasonic machining of microhemispherical molds with UCET is established and verified by experiments. The micro-ultrasonic amplitude, the abrasive material and the abrasive size is found to have significant influences on the tool wear of the UCET. The wear rates of tungsten carbide and silicon nitride ceramic tools are 2.22% and 3.64%, respectively, which are far less than the wear rate of 8.03% of bearing steel. The wear condition agrees with the theoretical model. The machining experiment shows that the radius change, ΔR, is 6.47 <i>µ</i>m of the microhemispherical mold processed by UCET, which is much better than 32 <i>µ</i>m of the micromold processed by micro-electro discharge machining at one time. After 10 continuous machining runs, the deviation rate of the form accuracy of the micromold is 1.71%, 3.71% and 24.21%, due to the wear of tungsten carbide, silicon nitride and bearing steel, respectively. It can be seen that micro-ultrasonic machining of microhemispherical molds using UCET has the characteristics of a high initial form accuracy, low wear rate, high integrity and form accuracy. This is a potentially effective method to obtain micromolds with high accuracy and surface integrity.

Ultra-precision machining of polygonal Fresnel lens on roller mold

Diamond micro-scraping for the fabrication of polygonal Fresnel lens structure array on roller molds

A New Diamond Machining Approach for Extendable Fabrication of Micro-Freeform Lens Array

Ultra-precision Single-point Grinding Technique and Profile Error Compensation Method for Machining Aspheric Mould

Ultraprecision Fabrication of Large Stamping Die of Wolter Mirror for an X-Ray Telescope by ELID Grinding

Fabrication of Microglass Lens Mould by Using Ultraprecision Microgrinding Process

Discussions on On-Machine Measurement of Aspheric Lens-Mold Surface

Incined Magnetorheological Finishing and Its Path Controlling

Nano-Precision Synergistic Finishing Process Integrated ELID-Grinding and MRF

Ultra-Precision Cutting Of Fresnel Lenses On Single Crystal Germanium And The Machining Processing Analysis

A Framework of an Ultra-Precision Roller Machining Equipment for the Fabrication of Patterned Microstructured Optics

Fabrication and evaluation of complicated microstructures on cylindrical surface

Experimental Investigation of the Rapid Fabrication of Micron and Submicron Structures on Polymers Utilizing Ultrasonic Assisted Embossing

A globally smooth tool path reconstruction method for the ultra-precision diamond turning of microlens arrays

Ultra-precision Manufacturing of Microlens Arrays Using an Optimum Machining Process Chain

A Profile Shaping and Surface Finishing Process of Micro Electrochemical Machining for Microstructures on Microfluidic Chip Molds

Generic fabrication solution of freeform Fresnel optics using ultra-precision turning

Micro ultrasonic machining hemispherical mold for MEMS resonator gyroscope using a novel ultraprecise ceramic entire-ball tool

Experimental Investigation on Form Error for Slow Tool Servo Diamond Turning of Micro Lens Arrays on the Roller Mold

B Axis Rotating Machining of Microstructured Optical Molds with Rotational Symmetry Based on Ultra-Precision Cutting

Development of a High-Speed Precision Ultrasonic-Assisted Spindle for Ultra-Precision Optical Mold Machining