Abstract:In this study, a sputtering system was adopted for the preparation of Cu2ZnSnS4 (CZTS) thin films with high material quality. The system precisely controlled the elemental ratio in a copper-zinc-tin (CZT) precursor for contributing to the grain growth of CZTS crystallites, and reduced the detrimental formation of the Cu2-xS secondary phase during the high-temperature sulfurization process. The CZT precursor was prepared in a layer sequence of Zn/Sn/Cu/Zn, as the Cu-capping layer could protect the underlying Zn/Sn bilayer from volatilization during the high-temperature sulfurization. The CZT precursors were subjected to the sulfurization process at varied temperatures ranging from 480 to 560 °C for 20 min to form the CZTS thin film. In this study, the Cu/(Zn + Sn) and Zn/Sn ratios in the CZTS film were studied by energy dispersive X-ray spectroscopy measurements, and both ratios revealed elevations with an increasing sulfurization temperature, owing to the thermal volatilization of Zn and Sn. Thus, the formation of the undesirable Cu2-xS secondary phase was enhanced, and the surface roughness and density of voids on the CZTS thin films were increased. For a reduced Zn/Sn ratio with a reduced sulfurization temperature, the improved CZTS thin-film quality was demonstrated by the increased X-ray diffraction (XRD) and Raman intensity, along with the reduction of the XRD linewidth of the (112) CZTS crystal phase. A CZTS thin film with a sulfurization condition of 500 °C for 20 min showed a low Zn/Sn ratio (at 1.1), along with the features of a dense and smooth thin-film surface. Moreover, a reduced photoluminescence spectra full width at half maximum (FWHM) value of 92.7 meV was observed. In addition, for further improving the grain growth of CZTS, a pre-annealing process of a CZT precursor was conducted at a temperature of 350 °C for 30 min. An enhancement of the CZTS crystallite size with the stoichiometric formation of a CZTS phase and a reduced Cu2-XS phase was observed, indicating the superior material quality of the CZTS thin films.

Effect of stacking sequence on the structural ordering and phase formation in the sequentially deposited copper zinc tin sulfide thin films

Effect Of Stripe Order On The Vortex Phase Transition In La1.44nd0.4sr0.16cuo4 Films

Effect of the stacking order, annealing temperature and atmosphere on crystal phase and optical properties of Cu2SnS3

Phases formation of Cu2ZnSnS4 thin films by sulfurizing stacked precursors by sputtering from CuZn and CuSn targets

Effect of Layer and Stacking Sequence in Simultaneously Grown 2H and 3R WS2 Atomic Layers

Impact of stacking order and annealing temperature on properties of CZTS thin films and solar cell performance

Study of optical and structural properties of CZTS thin films using copper capping layer and sulfurization to correct stoichiometry.

Microstructural Insights into the Transformation of Cubic, Low-Temperature, Disordered Cu 2 ZnSnS 4 into the Tetragonal Form

Effect of stacking order on the electronic state of 1 T − TaS 2

Unusual Stacking Variations in Liquid-Phase Exfoliated Transition Metal Dichalcogenides

Effect of sulfurization time on the properties of copper zinc tin sulfide thin films grown by electrochemical deposition

Effect of the Morphology of Long-Period Stacking Ordered Phase on Mechanical Properties and Corrosion Behavior of Cast Mg-Zn-Y-Ti Alloy

Effect of sputtering sequence on the properties of Ag-Cu-In-Ga metal precursors and reacted (Ag,Cu)(In,Ga)Se<inf>2</inf> films

Investigation of Zn/Sn ratio for improving the material quality of CZTS thin films with the reduction of Cu2-xS secondary phase

CTZS Thin Films Grown by a Sequential Deposition of Precursors

Reaction Time and Film Thickness Effects on Phase Formation and Optical Properties of Solution Processed Cu2ZnSnS4 Thin Films

Bilayer SnS$_{2}$: Easy-tunable Stacking Sequence by Charging and Loading Pressure

Structural Ordering in Ultrasmall Multicomponent Chalcogenides: The Case of Quaternary Cu-Zn-In-Se Nanocrystals

Distinguishing different stackings in WSe2 bilayers grown Using Chemical Vapor Deposition

Evolution of Cation Ordering and Crystal Defects Controlled by Zn Substitutions in Cu2SnS3 Ceramics

The determining role of stacking fault in the mechanoluminescence properties of ZnS: Mn thin films