Abstract:The present study focuses on developing a Cu 2 ZnSnS 4 film using ethylenediaminetetraacetic acid as a complexing agent via a one-pot hydrothermal route. The effective Molybdenum oxide (MoO x ) film has been developed along with the Cu 2 ZnSnS 4 film preparation. The influences of various zinc concentrations on structural, optical, and electrical properties were also investigated. X-ray diffraction (XRD) and Raman investigations revealed their development of crystalline kesterite phase Cu 2 ZnSnS 4 films with preferred orientation along the (112) plane. They revealed that structure property changes with zinc concentration: at a lower zinc concentration, Cu 2 ZnSnS 4 and Cu 2−X S phases developed, however with increasing concentrations of zinc (zinc-rich), a single kesterite phase Cu 2 ZnSnS 4 evolved. Raman spectroscopy also verified the presence of a MoO X layer on the Mo substrate. Field emission scanning electron microscopy revealed surface morphology changes from coral reefs to flakes. UV-visible investigation revealed absorbance spectra with high absorption coefficient values exceeding 10 5 cm −1 in the visible and infrared regions. Single-phase (zinc-rich) Cu 2 ZnSnS 4 film's band gap was also anticipated to be 1.42 eV. The photoluminescence investigation of the (zinc-rich) single-phase Cu 2 ZnSnS 4 film revealed an emission peak at 1.569 eV. The Hall Effect investigation demonstrated that the zinc-rich film is a p-type semiconductor with mobility of 15.6 cm −2 Vs −1 , resistivity of 2 Ω cm, and charge carrier concentration of 1 × 10 16 cm −3 . The Mo foil /MoO x /CZTS/Zn 0.35 Cd 0.65 S /ZnO/Al heterojunction solar cell has been constructed well. With an open-circuit voltage of (0.410) V, a short-circuit current density of (12.6) mA/cm 2 and a fill factor of (38.7%), a photovoltaic conversion efficiency of (2%) was achieved under 100 mW/cm 2 .

Impact of stacking order and annealing temperature on properties of CZTS thin films and solar cell performance

Effect of the stacking order, annealing temperature and atmosphere on crystal phase and optical properties of Cu2SnS3

Formation of Cu2ZnSnS4 thin film solar cell by CBD-annealing route: Comparison of Cu and CuS in stacked layers SnS/Cu(S)/ZnS

A Strategy to Stabilize Kesterite Czts for High-Performance Solar Cells

Improved Performance of Electroplated CZTS Thin-Film Solar Cells with Bifacial Configuration

Thermal Effect on CZTS Solar Cells in Different Process of ZnO/ITO Window Layer Fabrication

Optical and Electrical Properties Study of Sol-Gel Derived Cu2znsns4 Thin Films for Solar Cells

Reaction Time and Film Thickness Effects on Phase Formation and Optical Properties of Solution Processed Cu2ZnSnS4 Thin Films

Phase composition of the earth-abundant Cu2SnS3 thin films with different annealing temperature and its effects on the performance of the related solar cells

Synthesis and characterization of CZTS and Cu2-xAgxZnSnS4 thin films for the application of solar cells

Fabrication of Cu2ZnSnS4 Thin Films Based on Facile Nanocrystals-Printing Approach with Rapid Thermal Annealing (RTA) Process

Preparation of High-Quality Cu2ZnSnS4 Thin Films for Solar Cells Via the Improvement of Sulfur Partial Pressure Using a Static Annealing Sulfurization Approach

Investigation of broad-band optical absorption and electrical properties in vacuum annealed CZTS/Ag multi-layered stack structure for plasmonic solar cell application

Facile growth of kesterite CZTS film by one-pot hydrothermal route using EDTA as complex agent for heterojunction solar cell applications: influence of zinc concentration

Impact of Sol–gel Precursor Treatment with Preheating Temperature on Properties of Cu2ZnSnS4 Thin Film and Its Photovoltaic Solar Cell

Influences of Rapid Thermal Annealing on Cu2ZnSnS4 Thin Film Fabricated by Spraying Approach

The effect of post-annealing on the performance of the Cu2ZnSnS4 solar cells

The Effect of CZTS Ultrathin Film Thickness on the Electrical Characteristic of CZTS/Si Heterojunction Solar Cells in the Darkness and under the Illumination Conditions

Growth Mechanism and Properties of Nanostructure Cu 2 ZnSnSe 4 Thin Films and Solar Cells

Fabrication and Characterization of Cu2ZnSnSe4 Thin-Film Solar Cells Using a Single-Stage Co-Evaporation Method: Effects of Film Growth Temperatures on Device Performances

Band Positions and Photoelectrochemical Properties of Cu2znsns4 Thin Films by the Ultrasonic Spray Pyrolysis Method