Abstract:Multi-layer crystallization and uncontrollable defects were the main factors that limiting the quality of Cu 2 ZnSn(S,Se) 4 (CZTSSe) films. Here a hybrid crystallization strategy was proposed to simultaneously improve the morphology and defect properties of CZTSSe film. Firstly, we found the variation of the microstructures (constitution, chemical environment of the elements, etc.) in precursor films can greatly alter the grain-growths of CZTSSe films. Detailed characterizations revealed that the chemical environment of S in the precursor film may influence the S-to-Se substitution of the film during the selenization process. This can further affect the grain-growth mechanism and the properties of CZTSSe film. While the S-to-Se substitution of the film mainly occurred below 500°C, the NaSe x on the surface of the film could dominate the grain-growth (Na-mechanism). For this mechanism, the CZTSSe film exhibited bi-layer morphology and relatively high band-tail energy, but shallow-acceptor was detected in the film. The solar cells based on the CZTSSe films reached the efficiency of 10.6%. As a comparison, liquid phase could be generated when the S-to-Se substitution of the film shifted to higher temperature (>500°C). In this condition, the grain-growth would be dominated by the liquid phase (LP-mechanism). Such mechanism can eliminate the multi-layer crystallization and reduce the band-tail energy, but the surface properties of the CZTSSe film was deteriorated and the formation of shallow-acceptor in CZTSSe was inhibited. The fabricated solar cells achieved the efficiency of 10.3%. Based on the results above, a bi-layer precursor film contained sub-layers with different microstructures was proposed to regulate the crystallization of CZTSSe. The co-existence of different microstructures in the precursor film could induce a hybrid grain-growth mechanism for the CZTSSe film (e.g., the Na-mechanism worked on the surface while the LP-mechanism worked in the bottom simultaneously). Such grain-growth mechanism can yield CZTSSe film with uniform morphology and favorable defect properties. The CZTSSe solar cells based on the hybrid grain-growth mechanism achieved the best efficiency of 12.6%. The investigation in this paper would provide new solutions for the crystallization regulation on CZTSSe photovoltaic material.

Growth Mechanism and Properties of Nanostructure Cu 2 ZnSnSe 4 Thin Films and Solar Cells

Growth Mechanism and Properties of Nanostructure Cu2ZnSnSe4 Thin Films and Solar Cells

Formation of Alloyed Cu2Cox Zn1-x Sn(S,Se)4 Absorption Layer and Its Application in Solar Cells

Formation of Alloyed Cu2CoxZn1-xSn(S,Se)4 Absorption Layer and Its Application in Solar Cells.

On the Growth Process of Cu2ZnSn(S,Se)4 Absorber Layer Formed by Selenizing Cu–ZnS–SnS Precursors and Its Photovoltaic Performance

Large-Grain Spanning Monolayer Cu2 ZnSnSe4 Thin-Film Solar Cells Grown from Metal Precursor

Simultaneously improving the morphology and defect properties of CZTSSe film via hybrid grain-growth mechanism

Co-electroplated Cu2ZnSnS4 thin-film solar cells: The role of precursor metallic composition

Growth of Cu2znsnse4 Film under Controllable Se Vapor Composition and Impact of Low Cu Content on Solar Cell Efficiency

Optimized grain growth for efficient solution-processed Bi-doped Cu2ZnSn(S,Se)4 thin film solar cells via spin-coated layers adjustment and two-step selenization

Growth of Large Grain-Size Cu2ZnSn(SxSe1-x)4 Thin Films by Annealing Precursors Sputtered from a Single Quaternary Target for Solar Cells Application

Effects of Selenization Conditions on Microstructure Evolution in Solution Processed Cu2ZnSn(S,Se)(4) Solar Cells

Realization of 11.5% Efficiency Cu2ZnSn(S,Se)4 Thin‐Film Solar Cells by Manipulating the Phase Structure of Precursor Films

Preparing Cu2ZnSnSe4 thin film solar cells based on selenium containing precursors

A Novel Metal Precursor Structure for Electrodepositing Ultrathin CIGSe Thin Film Solar Cell with High Efficiency.

Electrochemical synthesis of Cu 2 ZnSnS 4 and Cu 2 ZnSnSe 4 thin films for solar cells

Surprising Efficiency Enhancement of Cu 2 ZnSn(S,Se) 4 Solar Cells with Abnormal Zn/Sn Ratios

Visual Color Change During Spin‐coating Guiding the Quality of Cu2ZnSn(S,Se)4 Films

GROWTH OF Cu2ZnSn(S,Se)4 THIN FILMS BY A SIMPLE ECO-FRIENDLY SOLUTION ROUTE METHOD

Realization of 11.5% Efficiency Cu 2 ZnSn(S,Se) 4 Thin‐Film Solar Cells by Manipulating the Phase Structure of Precursor Films

A CZTSe Solar Cell with 8.2% Power Conversion Efficiency Fabricated Using Electrodeposited Cu/Sn/Zn Precursor and a Three-Step Selenization Process at Low Se Pressure