Abstract:The high-quality growth of midwave infrared light emitters on silicon substrates will advance their incorporation into photonic integrated circuits, and also introduce manufacturing advantages over conventional devices grown on lattice-matched GaSb. Here we report interband cascade light emitting devices (ICLEDs) grown on 4 degree offcut silicon with 12% lattice mismatch. Four wafers produced functioning devices, with variations from wafer to wafer but uniform performance of devices from a given wafer. The full width at half maxima for the (004) GaSb rocking curves were as narrow as ∼ 163 arc seconds, and the root mean square surface roughness as small as 3.2 nm. Devices from the four wafers, as well as from a control structure grown to the same design on GaSb, were mounted epitaxial-side-up (epi-up). While core heating severely limited continuous wave (cw) emission from the control devices at relatively modest currents, efficient heat dissipation via the substrate allowed output from the devices on silicon to increase up to much higher currents. Although the devices on silicon had higher leakage currents, probably occurring primarily at dislocations resulting from the lattice-mismatched growth, accounting for differences in architecture the efficiency at high cw current was approximately 75% of that of our previous best-performing standard epi-down ICLEDs grown on GaSb. At 100 mA injection current, 200-µm-diameter mesas produced 184 µW of cw output power when operated at T = 25 °C, and 140 µW at 85°C. Epi-up mid-IR light emitters grown on silicon will be far simpler to process and much less expensive to manufacture than conventional devices grown on GaSb and mounted epi-down.

Cascaded InGaSb quantum dot mid-infrared LEDs

Mid-infrared interband cascade light-emitting diodes with InAs/GaAsSb superlattices on InAs substrates

InSb Quantum Dot LEDs Grown by Molecular Beam Epitaxy for Mid-Infrared Applications

Insb Based Quantum Dot Nanostructures for Mid-Infrared Photonic Devices

InAs/GaSb Superlattice Interband Cascade Light Emitting Diodes with High Output Power and High Wall-Plug Efficiency

Efficient silicon quantum dots light emitting diodes with an inverted device structure

Iodide capped PbS/CdS core-shell quantum dots for efficient long-wavelength near-infrared light-emitting diodes

Gain and Threshold Current in Type II In(As)Sb Mid-Infrared Quantum Dot Lasers

Mid-infrared interband cascade light emitting devices grown on off-axis silicon substrates

Gain and Tuning Characteristics of Mid-Infrared InSb Quantum Dot Diode Lasers

InSb Quantum Dots for the Mid-Infrared Spectral Range Grown on GaAs Substrates Using Metamorphic InAs Buffer Layers

Ultrafast cascade charge transfer in multi bandgap colloidal quantum dot solids enables threshold reduction for optical gain and stimulated emission

GaSb-based Type-I Quantum Well Cascade Diode Lasers Emitting at Nearly 2-Μm Wavelength with Digitally Grown AlGaAsSb Gradient Layers*

Inas/Ingaasp/Inp Quantum Dot Lasers Grown by Metalorganic Chemical Vapor Deposition

InGaN/GaN Multi-Quantum-well Planar Metal-Semiconductor-metal Light-Emitting Diodes

High Operating Temperature Mid-Infrared InGaAs/GaAs Submonolayer Quantum Dot Quantum Cascade Detectors on Silicon

Near-infrared quantum dot light emitting diodes employing electron transport nanocrystals in a layered architecture

Interband cascade light-emitting diodes grown on silicon substrates using GaSb buffer layer

Nanoscale Mapping of Light Emission in Nanospade-Based InGaAs Quantum Wells Integrated on Si(100): Implications for Dual Light-Emitting Devices

Cascaded Deep Ultraviolet Light-Emitting Diode Via Tunnel Junction

Metamorphic InGaAs/InAsPSb Quantum Well Light Emitting Diodes for Operation in the Short‐Wave Infrared Region