Abstract:Purpose The main aim of this paper was to study the self-lubricating behavior and failure mechanism of silver-rich solid film for in-depth analyzing of the friction and wear property of TiAl-10 wt. per cent Ag self-lubricating composite. Design/methodology/approach The friction and wear property of TiAl-10 wt. per cent Ag self-lubricating composite sliding against Si3N4 ball was tested under the testing conditions of ball-on-disk wear system. Field emission scanning electron microscopy and electron probe microanalyzer were used to analyze the surface morphology of silver-rich solid film. The main element contents were tested by energy dispersive spectroscopy. Silver phase on wear scar could be well identified using X-ray photo-electron spectroscopy. The theory calculation of shearing stress on wear scar was executed to discuss the local failure mechanism of silver-rich solid film. The lubricating role of silver was also discussed to analyze the anti-friction and anti-wear behavior of silver-rich solid film. Findings The friction coefficients and wear rates of TASC gradually reduced at 0-65 min, and approached to small values (0.31 in friction coefficient and 3.10×104 mm3N-1m-1 in wear rate) at 65-75 min. The excellent friction and wear behavior of TASC was mainly attributed to the lubricating property of silver-rich film at 65-75 min. At 12→20 N, surface shearing stress increased up to 146.31 MPa, and exceeded more than the shearing strength (125 MPa) of silver-rich film, which caused the propagating of fatigue crack and the destroying of silver-rich film, leading to high friction and severe wear. Originality/value It is important that the self-lubricating behavior and local failure of solid film is explored for further understanding the friction and wear property of TiAl alloys.

A comparative study on the electrical and tribological characteristic of magnetron sputtered Ag, Cu and Al films under current-carrying friction

Comparative Study of the Tribology of Amorphous Carbon Films Via Magnetron Sputtering Depending on the Different Magnetic Field

Study on the electrotribological property of Cu-Ag-Cr alloy

Effect of Electrical Current Density, Apparent Contact Pressure, and Sliding Velocity on the Electrical Sliding Wear Behavior of Cu–Ti3AlC2 Composites

A comparative study on the electrical contact behavior of CuZn40 and AgCu10 alloys under fretting wear: Effect of current load

Study of the Friction and Wear of Electrified Copper Against Copper Alloy under Dry or Moist Conditions

Microstructure evolution and anti-wear mechanism of Cu film fabricated by magnetron sputtering deposition

Tribo-Electric Behaviors of Copper under Dry Sliding Against Cu-Cr Alloys

Tribological Properties of Metallic Nanoparticles As Lubricant Additives under the Applied Electric Currents

The Analysis of the Self-Lubricating Behavior and Local Failure Mechanism of Silver-Rich Solid Film

Tribological properties characterization of Ti/Cu/N Thin films prepared by DC magnetron sputtering on titanium alloy

Insights into the Tribological Properties and Electrical Conductivity of Cu–C Coating Under Grease Lubrication

Comparative Investigation into the Friction and Wear Behaviours of a Cu–Ag Contact Wire/carbon Strip and a Pure Copper Contact Wire/carbon Strip at High Speeds

Current Carrying Friction and Wear Behaviors of Copper-10% Graphite Alloy

Effects of Tribo-Film on Wear Resistance of Additive Manufactured Cobalt-Based Alloys During the Sliding Process

Analysis of Friction Interfaces with Sinusoidal Microchannels and the Hybrid Lubrication Mechanisms of a Tribo-Film

The Experiment Research and Engineering Verification on the Synergistic Lubrication Properties of Silver and Multiwalled Carbon Nanotubes

Study on Current-Carrying Tribological Characteristics of C-Cu Sliding Electric Contacts under Different Water Content

A comparative study on torsional fretting and torsional sliding wear of CuNiAl under different lubricated conditions

Tribological study of W-S-(C) sputtered coatings sliding against aluminium at elevated temperatures

A Study of the Friction and Wear Performance of MoSx Thin Films Produced by Ion Beam Enhanced Deposition and Magnetron Sputtering