Abstract:The potential for the use of copper coatings on steel switching mechanisms is abundant owing to the high conductivities and corrosion resistance that they impart on the engineered assemblies. However, applications of these coatings on such moving parts are limited due to their poor tribological properties; tendencies to generate high friction and susceptibility to degradative wear. In this study, we have fabricated a fluorinated graphene oxide-copper metal matrix composite (FGO-CMMC) on an AISI 52100 bearing steel substrate by a simple electrodeposition process in water. The FGO-CMMC coatings exhibited excellent lubrication performance under pin-on-disk (PoD) tribological sliding at 1N load, which reduced CoF by 63 and 69%, compared to the GO-CMMC and pure copper coatings that were also prepared. Furthermore, FGO-CMMC achieved low friction and low wear at higher sliding loads. The lubrication enhancement of the FGO-CMMCs is attributed to the tribochemical reaction of FGO with the AISI 52100 steel counterface initiated by the sliding load. The formation of an asymmetric tribofilm structure on the sliding track is critical; the performance of the FGO/Cu tribofilm formed in the track is boosted by the continued fluorination of the counterface surface during PoD sliding, passivating the tribosystem from adhesion-driven breakdown. The FGO-CMMC and GO-CMMC coatings also provide increased corrosion protection reaching 94.2 and 91.6% compared to the bare steel substrate, allowing for the preservation of the long-term low-friction performance of the coating. Other influences include the improved interlaminar shear strength of the FGO-containing composite. The excellent lubrication performance of the copper matrix composite coatings facilitated by FGO incorporation makes it a promising solid lubricant candidate for use in mechanical engineering applications.

Insights into the Tribological Properties and Electrical Conductivity of Cu–C Coating Under Grease Lubrication

Study on the Tribological Performance of Copper-Based Powder Metallurgical Friction Materials with Cu-Coated or Uncoated Graphite Particles as Lubricants

Dry sliding tribological properties of Cu-WS 2 self-lubricating composites at 25–500 °C

Enhanced current-carrying tribological properties of copper-based microporous friction pairs containing slow-release polyaniline conductive grease

Tribology of Copper Metal Matrix Composites Reinforced with Fluorinated Graphene Oxide Nanosheets: Implications for Solid Lubricants in Mechanical Switches

Investigation on Friction and Wear Behaviors of Cu–Zn Composition with Doped MoS2 Powder under Electric Field

Development of Cu-15Ni-8Sn/MoS 2 self-lubricating composites with desirable mechanical and friction properties

On the tribological behaviors of Cu matrix composites with different Cu-coated graphite content

Investigation on the Tribological Properties of FeS, Cu2S, MoS2, and WS2 Sulfide Films Under Water Lubrication

Tribological and Conductive Behavior of Cu/Cu Rolling Current-Carrying Pairs in a Water Environment

Microstructure Characteristics and Tribological Properties of Gradient Cu-MoS2 Self-Lubricating Coating Fabricated by Selective Laser Melting of Ink-Printed Metal Nanoparticles

Study on Current-Carrying Tribological Characteristics of C-Cu Sliding Electric Contacts under Different Water Content

Characterization and Tribological Properties of Graphene/Copper Composites Fabricated by Electroless Plating and Powder Metallurgy

Effects of Content of MoS<Subscript>2</Subscript> on Sliding Tribological Behavior of Copper-Based Powder Metallurgy Materials under Electrical Current

Tribological performance study and prediction of copper coated by MoS 2 based on GBRT method

Tribological Behavior of WS2 Nanoparticles as Additives in Calcium Sulfonate Complex–Polyurea Grease

Tribological performance of Mn3(PO4)2 coating and PC/MoS2 coating in Rolling–Sliding and pure sliding contacts with gear oil

Tribology performance of Cu-C/C composites with and without current

Tribological performance of MoS2 coating on slipper pair in axial piston pump

Tribological Performance of MoS 2 Coating on Slipper Pair in Axial Piston Pump

Lubrication Performance of Graphene in the Sliding Electrical Contact Interface