Abstract:The preparation and tribological properties of PAI/PI‐EPN polymer coatings. To improve the tribological properties of polar crane copper alloy bearings to withstand wear under dry sliding wear and grease lubrication at low temperatures, three kinds of coating materials modified by incorporating WS2 and SiC into polyamide‐imide/polyimide‐phenolic epoxy resin were designed. These composite coatings were sprayed on the surfaces of CuPb22.5Sn2.5 copper alloys by liquid spraying technique. Firstly, the tribological experiments were performed with three different coatings. Then, nanoindentation testing and wear morphology analysis were conducted. The results show that the hardness of the composite coatings decreases with the increase of WS2. As the content of WS2 increases, the coefficients of friction (CoFs) of coatings decreases under dry sliding wear. The S2 coating filled with 7.5 wt% WS2 exhibits the lowest wear rate and the best wear resistance under low temperature and dry sliding wear. The coatings form a lubricating film on the worn surface under dry sliding wear at −70°C, improving the wear resistance of the coatings. The primary wear mechanisms are adhesive wear and fatigue wear. The wear rates of the coatings increase with the increasing content of WS2 under low‐temperature grease lubrication. The S1 coating filled with 5.0 wt% WS2 exhibits the lowest wear. The S1 coating demonstrates a CoF of 0.07 and a wear rate of 6.5 × 10−6 mm3N−1 m−1 at 0°C, showing excellent friction‐reducing and wear‐resistant properties. The primary wear mechanism is adhesive wear. The wear mechanisms of polymer coatings are closely related to temperature. The dominant wear mechanisms transfer from abrasive wear to adhesive wear and fatigue wear under dry sliding wear and decreasing temperature. The wear mechanisms transfer from predominantly adhesive and abrasive wear to adhesive wear, fatigue wear, and abrasive wear under grease lubrication. The hardness of the coatings and the behavior of the polymer at various low temperatures are the primary factors that affect the differing wear mechanisms.

Enhanced current-carrying tribological properties of copper-based microporous friction pairs containing slow-release polyaniline conductive grease

Insights into the Tribological Properties and Electrical Conductivity of Cu–C Coating Under Grease Lubrication

Enhanced tribological properties of sliding contacts through the synergistic effect of PTFE film and PSAIL 2280

High Temperature Tribological Performance of Steel/Copper Friction Pairs Lubricated with a Modified C-WS2-(Fe3O4 + TiN) Nanoadditives in Non-Copper Coated Solid Wires

Study on the worn surface layers of the friction pair consisting of semimetallic friction materials and grey cast iron

Preparation and Tribological Properties of Copper Nanoparticles As Lubricant Additive

Tribological Properties of Metallic Nanoparticles As Lubricant Additives under the Applied Electric Currents

Study on the Tribological Performance of Copper-Based Powder Metallurgical Friction Materials with Cu-Coated or Uncoated Graphite Particles as Lubricants

Study on friction and wear behavior of copper fibers in semimetallic friction materials

Copper submicrospheres induced by pulsed laser-irradiation with enhanced tribology properties

Controlled Friction Behaviors of Porous Copper/Graphite Storing Ionic Liquid Through Electrical Stimulation

Synchronously improved thermal conductivity and tribological performance of self-lubricating fabric liner composites via integrated design method with copper yarn

Ultralow friction of copper by a green water-based lubricant containing phytic acid

The investigation of tribological properties of PAI/PI‐EPN polymer coating filled with WS2 and SiC at low temperatures

Friction Reducing and Anti-Wear Property of Metallic Friction Pairs under Lubrication of Aqueous Solutions with Polyether Added

An investigation on the tribological behaviors of steel/copper and steel/steel friction pairs via lubrication with a graphene additive

Laser cladding Mo-based coatings on copper alloys to improve the current-carrying tribological properties of Cu/Al friction pairs

Tribology of Copper Metal Matrix Composites Reinforced with Fluorinated Graphene Oxide Nanosheets: Implications for Solid Lubricants in Mechanical Switches

Tribological and Conductive Behavior of Cu/Cu Rolling Current-Carrying Pairs in a Water Environment

Tribological Behaviors of Several Polymer–polymer Sliding Combinations under Dry Friction and Oil-Lubricated Conditions

Towards the superlubricity of polymer-steel interfaces with ionic liquids and carbon nanotubes