Abstract:1.INTRODUCTION In the physical researches, friction phenomenon that describes the force existing between relative moving surfaces paves a great challenge to the industrial production and the energy efficiency. The friction reduction or elimination in the moving mechanical system would be extremely favorable to the industrial manufacture and the sustainable development of the earth. Therefore, the phenomenon “superlubricity” [1] that refers to friction coefficient less than 0.01 has become an appealing focus in recent years. Superlubricity has been attained both between solid interfaces and across liquid medium. The carbon based materials and two-dimensional materials, such as Molybdenum disulfide [2] and diamond like carbon film (DLC) [3] have been investigated mostly to achieve solid superlubricity. Different from the mechanism of solid superlubricity, the liquid superlubricity was mainly focused on the reduction of shear strength of confined liquid between two friction surfaces. On micro-level, Raviv et al. obtained a super-low friction of alkali salt solutions between mica surfaces by surface force apparatus (SFA) [4]. The liquid superlubricity above was mainly attributed to the hydration effect, leading to the great reduction of energy dissipation in the hydration layer [5]. At macro-scale, there are also some materials found having liquid superlubricity properties. Kato found that superlubricity can be achieved when water was confined between ceramics, where the formation of silica gel provided an efficient boundary lubrication [6]. Recently phosphoric acid solution was found to achieve superlubricity with a friction coefficient of 0.004 [7]. Compared with the solid superlubricity, the water-based superlubricity is more promising for industrial application, because of its nonsensitive to environment conditions. It is interesting and feasible to explore the water-based liquid superlubricity based on other mechanisms. In the present work, we investigated the friction properties of acid solution and a super-low friction coefficient of 0.004 was achieved between polytetrafluoroethylene (PTFE) and sapphire without a running-in process. Here the friction properties were explored with different sliding velocity and pH value of the lubricant, and a further investigation on the mechanism through which superlubricity is obtained has been performed.

Ultralow friction of copper by a green water-based lubricant containing phytic acid

Synthesis of Water-Soluble Cu Nanoparticles and Evaluation of Their Tribological Properties and Thermal Conductivity As a Water-Based Additive

Hydrothermal synthesis of copper zirconium phosphate hydrate [Cu(OH)2Zr(HPO4)2·2H2O] and an investigation of its lubrication properties in grease.

Ionic Liquid Additives in Water-Based Lubricants for Bearing Steel – Effect of Electrical Conductivity and pH on Surface Chemistry, Friction and Wear

Study on ultra-low friction performance of PTFE film combined with water-based ionic liquid lubrication at electrical contact interfaces

Preparation and Tribological Properties of Surface-Capped Copper Nanoparticle as a Water-Based Lubricant Additive

Synthesis of Polyzwitterionic Carbon Dots with Superior Friction and Fatigue Control Behaviors under Water Lubrication

Achieving Greener, Super-Robust Performance Water-Based Lubrication: Obtained by a Multifunctional Ionic Liquid Aqueous System and Formation of Unique Interfacial Interactions

Lubrication and Anti-Rust Properties of Jeffamine-Triazole Derivative as Water-Based Lubricant Additive

The mechanism of surface film of copper friction couple lubricated with ZDDP

Ultra-Low Friction System Using Special Wetting Interfaces: Bridging Across Various Wetting Regimes

Superlubricity between sapphire and ptfe achieved by acid

Enhanced current-carrying tribological properties of copper-based microporous friction pairs containing slow-release polyaniline conductive grease

A Simple Preparation of HDA-CuS Nanoparticles and Their Tribological Properties As a Water-Based Lubrication Additive

Tribological Performance and Wear Mechanism of Compound Containing S, P, and B as EP/AW Additives in Copper Foil Oil

Facile Fabrication of Novel Multifunctional Lubricant-Infused Surfaces with Exceptional Tribological and Anticorrosive Properties

Robust and universal macroscale superlubricity with natural phytic acid solutions

Copper phosphate nanosheets as high-performance oil-based nanoadditives: tribological properties and lubrication mechanism

Copper submicrospheres induced by pulsed laser-irradiation with enhanced tribology properties

Mass‐produced Cu Nanoparticles As Lubricant Additives for Reducing Friction and Wear

Anticorrosion and Lubricating Properties of a Fully Green Lubricant