Abstract:1.INTRODUCTION In the physical researches, friction phenomenon that describes the force existing between relative moving surfaces paves a great challenge to the industrial production and the energy efficiency. The friction reduction or elimination in the moving mechanical system would be extremely favorable to the industrial manufacture and the sustainable development of the earth. Therefore, the phenomenon “superlubricity” [1] that refers to friction coefficient less than 0.01 has become an appealing focus in recent years. Superlubricity has been attained both between solid interfaces and across liquid medium. The carbon based materials and two-dimensional materials, such as Molybdenum disulfide [2] and diamond like carbon film (DLC) [3] have been investigated mostly to achieve solid superlubricity. Different from the mechanism of solid superlubricity, the liquid superlubricity was mainly focused on the reduction of shear strength of confined liquid between two friction surfaces. On micro-level, Raviv et al. obtained a super-low friction of alkali salt solutions between mica surfaces by surface force apparatus (SFA) [4]. The liquid superlubricity above was mainly attributed to the hydration effect, leading to the great reduction of energy dissipation in the hydration layer [5]. At macro-scale, there are also some materials found having liquid superlubricity properties. Kato found that superlubricity can be achieved when water was confined between ceramics, where the formation of silica gel provided an efficient boundary lubrication [6]. Recently phosphoric acid solution was found to achieve superlubricity with a friction coefficient of 0.004 [7]. Compared with the solid superlubricity, the water-based superlubricity is more promising for industrial application, because of its nonsensitive to environment conditions. It is interesting and feasible to explore the water-based liquid superlubricity based on other mechanisms. In the present work, we investigated the friction properties of acid solution and a super-low friction coefficient of 0.004 was achieved between polytetrafluoroethylene (PTFE) and sapphire without a running-in process. Here the friction properties were explored with different sliding velocity and pH value of the lubricant, and a further investigation on the mechanism through which superlubricity is obtained has been performed.

Study on ultra-low friction performance of PTFE film combined with water-based ionic liquid lubrication at electrical contact interfaces

Enhanced tribological properties of sliding contacts through the synergistic effect of PTFE film and PSAIL 2280

Study on the Superlubricity Behavior of Ions under External Electric Fields at Steel Interfaces

The tribological behaviors and anti-corrosion performances of 5-phenyltetrazole ionic liquid additives for water lubricants

The ultra-low friction achieved via proton-type ionic liquid with inorganic salts at steel/steel interfaces

How Polytetrafluoroethylene Lubricates Iron: An Atomistic View by Reactive Molecular Dynamics

Superlubricity between sapphire and ptfe achieved by acid

Insight into macroscale superlubricity of polyol aqueous solution induced by protic ionic liquid

Ionic Liquid Additives in Water-Based Lubricants for Bearing Steel – Effect of Electrical Conductivity and pH on Surface Chemistry, Friction and Wear

Study of Water Lubrication in Sliding Point Contact Friction Pairs with Hydrophobic Surfaces

Friction and Wear Behavior of Polytetrafluoroethylene Bond- ed Solid Lubricating Coaling under Oil Lubrication

Ultralow friction PTFE/PEEK heterolayer: A new solid lubrication approach toward simplicity

Tribological Properties Of Polytetrafluoroethylene-Based Composite In Different Lubricant Media

Influence of interface liquid lubrication on triboelectrification of point contact friction pair

Ultra-Low Friction System Using Special Wetting Interfaces: Bridging Across Various Wetting Regimes

Achieving Greener, Super-Robust Performance Water-Based Lubrication: Obtained by a Multifunctional Ionic Liquid Aqueous System and Formation of Unique Interfacial Interactions

Effects of current-carrying conditions on lubrication and tribological performance of ionic liquid

Tribological properties of PTFE/PPS films deposited on the ultrasonic rolling textured substrates by electrohydrodynamic atomization under dry reciprocating sliding

Improving the tribological performance of CFRPTFE at elevated temperature by sliding against Ti-TiCx/DLC film

Investigation on anti-wear and corrosion-resistance behavior of steel-steel friction pair enhanced by ionic liquid additives under conductive conditions

Study of Lubrication Behavior of Pure Water for Hydrophobic Friction Pair