Abstract:Drive systems are an important part of general mechanical engineering, automotive engineering, and various other fields, with shaft–hub connections being an important part of such systems. Decisive aspects in the development of such systems today are, for example, high transmittable forces and torques, low masses, and the cheapest possible production of components. A possibly threefold increase in the force and torque transmission capacity can be achieved by using press–fit connections with an elastic–plastic design as opposed to regular elastically designed alternatives. An elastic–plastic design of the press–fit connection is achieved by using a large interference. A large transition geometry on the shaft (which replaces the conventional chamfer) is required to join such an interference. The material and space requirements have a negative impact on lightweight applications and limited building spaces. Therefore, the objective of the research presented in this paper is to design and analyze a detachable joining device that substitutes this geometry. A simulation study was conducted to determine the geometry of the joining device that improves the stress state and consequently the force and torque transmission capacity of the connection. Moreover, the influence of manufacturing tolerances of the joining device and the shaft, corresponding risks, and measures to mitigate them are analyzed using finite element analysis. The results show that large transition radii, enabled by using a joining device, lead to a homogenous distribution of plastic strain and pressure in the press–fit connection, even for large interferences ξ and soft hub materials like wrought aluminum alloys. The influence of manufacturing tolerances on the stress state was quantified, leading to design guidelines that minimize the risk of, e.g., the front face collision of a shaft and hub, while maximizing the power transmission of the connection. The results show the capability of a detachable joining device to enable elastic–plastic press–fit connections and the corresponding threefold increase in the force and torque transmission capacity in lightweight applications, resulting from the substitution of the installation space consuming and mass increasing the transition geometry of the shaft.

Achievement of a uniform contact pressure in a shaft–hub press-fit

Influence of the Friction Coefficient on the Stress Distributions and Contact Pressure in Press-Fits via Finite Element Analysis

Analysis of Friction Characteristics of Pneumatic Cylinders Based on LuGre Model

A Friction Evaluation Method Based on Barrel Compression Test

Influence of Fit Clearance and Tightening Torque on Contact Characteristics of Spindle–Grinding Wheel Flange Interface

An Investigation of Increased Power Transmission Capabilities of Elastic–Plastic-Designed Press–Fit Connections Using a Detachable Joining Device

Determining both radial pressure distribution and torsional stiffness of involute spline couplings

Tribological study of a press-fit assembling process

Multi-body contact modeling and statistical experimental validation for hub-bearing unit

Study on Static Assembly Interference Pressure Between a Thin-Wall Flexible Cup and a Hollow Flexible Shaft

Research on the Contact Pressure Calculation Method for the Misaligned Elastomeric Journal Bearing

Implicit Elastoplastic Finite Element Analysis of a Wheel Bearing Shaft Clinching Process Using the Multi-Body Function

A nonlinear contact pressure distribution model for wear calculation of planar revolute joint with clearance

Experimental and Theoretical Studies on Friction Contact of Bolted Joint Interfaces

Methodology development to design a representative test specimen for wear damage in spline couplings

Numerical Running-In Method for Modifying Cylindrical Roller Profile under Mixed Lubrication of Finite Line Contacts

Study on the Forming Process and Deformation Behavior of Inner Ring in the Wheel Hub Bearing Based on Riveting Assembly

Calculation of joint fits of elastic sleeve-pin couplings with shafts

An Engineering Approach to Hertzian Contact Elasticity—Part I

A New Method to Establish Coupled Multi-Physics Model of Lubricated Pin-Hole Oscillating Pair

Thermal Elastohydrodynamic Lubrication Analysis For Point Contact Transmission