Abstract:Performances of point contact EHL on multilayered or coated substrates have been analyzed in this paper via computer simulations, with emphasis on comparing the effects of Newtonian and non-Newtonian lubricants. The lubrication system consists of a rigid ball in contact with a smooth coated flat. The coating is perfectly bonded to an elastic substrate and it has a uniform thickness. The rigid ball has surface velocity U relative to the contact point. The hydrodynamic pressure p is governed by a generalized Reynolds equation in which the non-Newtonian effects of lubricants are characterized by two factors whose values are determined based on lubricant rheology. The Papkovich-Neuber potentials were employed to get the response functions in frequency domain for layered contact problems, and the influence coefficients relating pressure to surface displacements and stresses can be obtained via invert Fourier transform. The surface deformation was then calculated in terms of the pressure-displacement influence coefficients and the DC-FFT method was used to speed up the computation. The distributions of pressure, film thickness and subsurface stress have been analyzed for lubricants with different rheological behaviors, from which pressure and film thickness profiles along the rolling direction are calculated for Newtonian and Non-Newtonian lubricants. The central film thickness become thicker for stiffer coatings in the case of Newtonian lubricants, but the trend is reversed for Non-Newtonian lubricants. The surface stresses along the rolling direction show a spike corresponding to the pressure, which is more significant with stiffer coatings in the Newtonian case, but the spike is less visible for Non-Newtonian lubricants.

Numerical Running-In Method for Modifying Cylindrical Roller Profile under Mixed Lubrication of Finite Line Contacts

Numerical Prediction of Surface Wear and Roughness Parameters During Running-In for Line Contacts under Mixed Lubrication

Mixed Lubrication Analysis of Tapered Roller Bearings and Crowning Profile Optimization Based on Numerical Running-In Method

EHL Properties of Roller Contacts and Its Application Part Ⅱ: A Numerical Analysis of EHL for Engineering Logarithmic Roller

Numerical Prediction of Wear Process of an Initial Line Contact in Mixed Lubrication Conditions

Analysis of the Rolling Interface Contact Characteristics in Mixed Lubrication Based on Gaussian Distribution Theory

Optimization transient wear and contact performances of water-lubricated bearings under fluid-solid-thermal coupling condition using profile modification

A Full Numerical Solution to the Mixed Lubrication in Point Contacts

Computer model of mixed lubrication in point contacts

Combined Effect of Boundary Layer Formation and Surface Smoothing on Friction and Wear Rate of Lubricated Point Contacts During Normal Running-in Processes

A Mixed Elastohydrodynamic Lubrication Model With Asperity Contact

Evaluating the contact model for anisotropic non-Gaussian roughness in mixed lubrication regime

A fast calculation approach for elastohydrodynamic finite line contacts applicable to online calculations of rolling bearing models

Deterministic Solutions and Thermal Analysis for Mixed Lubrication in Point Contacts

Numerical thermal analysis of grease-lubrication in limited line contacts considering asperity contact

A Computer Thermal Model of Mixed Lubrication in Point Contacts

A Mixed Lubrication Model with Consideration of Starvation and Interasperity Cavitations

Comparison of Rolling Contact Fatigue Life Between Elastohydrodynamic Lubricated Point Contacts Pre and Post Running-in Treatment

Frictional contact analysis in a spherical roller bearing

Frictional Behaviour of Engineering Surfaces in Overall Lubrication Regimes of Point Contacts

Numerical Analysis Of Point Contact Ehl On Coated Substrates