Abstract:Molten oxide electrolysis is a promising route to reduce harmful environmental effects that occur when compared to more common industrial metal extraction techniques. This method can provide a stepping stone to decarbonise metal production and to do this suitable supporting electrolyte ore combinations need to be found. For the application of extracting titanium metal, due to the lack of electrochemical information on complex multi-component titanium metal oxide systems, designing an electrolytic cell and predicting ultra-high temperature (above 1500°C) behaviours becomes difficult. Hence, to gain insight into this electrochemical information a binary system, TiO 2 – Na 2 O, was investigated via experimentation and the use of FactSage 7.2 (a thermodynamic predictive software). This system was chosen as the phase diagram indicated deep eutectics either side of a congruently melting line compound situated at approximately 40 wt% TiO 2 , hence providing suitable operating temperature and composition ranges. Additionally, FactSage predicted that the relative potentials of the half-cell reactions 2Na 2 O → 4Na + O 2 and TiO 2 → Ti + O 2 , change order when the composition of TiO 2 is increased from below the congruently melting line compound, to above, indicating that above approximate 40 wt% TiO 2 , titanium metal may be favourably reduced first when electrolytically reducing the melt. Lab scale experimental process conditions (temperature and composition) were studied to determine the feasibility of electrolytically reducing titanium metal from the molten oxide mixture. From our research, expansion into other binary oxide systems for different metals of interest, specifically neodymium and tantalum, will be discussed. Specifically, systems that contain congruently melting line compounds with adjacent eutectic reactions were hypothesised to have a similar reordering of the half-cell potentials, favouring the reduction of the desired metals (Nd or Ta). Understanding simplified binary systems will scaffold insight into more complex, industrially-relevant molten oxide mixtures at ultra-high temperatures, potentially contributing to the discovery of new and more sustainable electrochemical pathways for technology-critical metals.

Reaction of tantalum oxide with calcium chloride–calcium oxide melts

Electrodeposition of Beta-Tantalum in Alkali Metal Halides and Oxohalide Melts

Anodic and Cathodic Reactions in Molten Calcium Chloride

Reduction of Tantalum Pentoxide with Aluminium and Calcium: Thermodynamic Modelling and Scale Skilled Tests

Facile synthesis of nanoscale tantalum powder by electro-deoxidation of Ta2O5

Preparation of Titanium by Electro-deoxidation of CaTiO3 in a Molten CaCl2-NaCl Salt

Electrochemical behavior of tantalum in ethylene carbonate and aluminum chloride solvate ionic liquid

Electrodeposition of tantalum and its electrochemical behaviors in molten NaCl-KCl

Calciothermic Reduction of Iron and Manganese Tantalates

Calciothermal reduction of tantalate iron and manganese

Thermolytic Formation Of Iro2+Ta2o5 Mixed Oxides Anodes Made From Chloride Precursors

Evaluating Phase Relations in Molten Oxides for Electrochemical Operating Windows for Selective Metal Reduction

Reaction mechanism of direct electro-reduction of titanium dioxide in molten calcium chloride

Investigation of the Electrochemical Reduction of Porous CaTiO 3 Pellets in CaCl 2 -0.5%CaO Molten Salt

Thermolytic formation and microstructure of IrO2 + Ta2O5 mixed oxide anodes from chloride precursors

Electrochemical extraction of Ti5Si3 silicide from multicomponent Ti/Si-containing metal oxide compounds in molten salt

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Characterisation of Electrochemical Properties for Molten Titanium(IV) Oxide - Sodium Oxide and Expansion into Other Binary Oxide Systems for the Electrolytic Reduction of Valuable Metals

One-step Synthesis of Spherical Al3Ta Alloy Powder by Electrolyzing Solid Ta2O5 in Molten Fluorides