Abstract:Pyrometallurgical processes produce slags that may contain valuable elements because of their high oxygen affinity. However, the concentration is extremely low, which causes losses. In fact, these elements, for example, tantalum and rare earth elements, are less than 1% recycled. To return such technologically important elements to the material cycle, pyrometallurgically is used to enrich them in the simplest possible compounds within the slag, which have favorable properties for recovery (morphology, crystal size, magnetic properties), allowing further mechanical separation. The purpose of modification of the slag system is to obtain engineered artificial minerals" (EnAM), a process in which targeted minerals with high element concentration are formed. In this article, this approach is investigated using tantalum-rich fayalitic slag, since this slag is commonly found in the industry for the pyrometallurgical treatment of waste electric and electronic equipment. Synthetic fayalitic slags in reducing environment under different cooling rates were produced with Ta addition. The characterization of the produced samples was carried out using powder X-ray diffraction (PXRD) and electron probe microanalysis (EPMA). Additionally, the speciation of Fe and Ta was accessible through X-ray absorption near-edge structure (XANES) spectroscopy. EPMA also provided a semiquantitative assessment of the Ta distribution in these individual compounds. In these slags, tantalum accumulated in perovskite-like oxidic and silicate compounds as well as in magnetic iron oxides. The enrichment factor is highest in tantalite/perovskite-type oxides (FexTayO6, CaxFeyTazO3) with up to 60 wt.% Ta and 'tantalomagnetite' (FeII(FeIII(2−5/3xTax)O4) with a maximum of ~30 wt.% Ta (only fast cooling). This is followed by a perovskite-like silicon containing oxide (XYO3) with 12–15 wt.% Ta (only slow cooling), and a hedenbergite-like compound (XYZ2O6) with a varying content of 0.3–7 wt.%. The Ta concentration in pure Fe, Fe(1-x)O, hercynitic spinel and hematite is negligible. Despite the very low phase fraction, the most promising EnAM compound is nevertheless perovskite-like tantalum oxide, as the highest enrichment factor was obtained. Tantalum-rich magnetite-like oxides also could be promising.

Calciothermal reduction of tantalate iron and manganese

Calciothermic Reduction of Iron and Manganese Tantalates

Phase Transformation during Metallothermic Reduction of Tantalite

Reduction of Tantalum Pentoxide with Aluminium and Calcium: Thermodynamic Modelling and Scale Skilled Tests

Thermodynamic Simulation and Experimental Investigation of the Calciothermic Reduction of Metals from Manganese and Iron Niobates

Kinetics and mechanism of low-temperature aluminothermic reduction of manganese tantalate

Reaction of tantalum oxide with calcium chloride–calcium oxide melts

Joint Metallothermic Reduction of Titanium and Rare Refractory Metals of Group V

Joint metallothermic reduction of titanium and rare refractory metals of V group

Influence of Niobium and Tantalum on the Phase Formation during the Metallothermic Interaction of Aluminum with Titanium Dioxide

Hydrothermal and wet-chemical synthesis of pure LiTaO3 powders by using commercial tantalum hydroxide as starting material

Behavior of Tantalum in a Fe-Dominated Synthetic Fayalitic Slag System—Phase Analysis and Incorporation

Electrochemical behavior of tantalum in ethylene carbonate and aluminum chloride solvate ionic liquid

Preparation of Ferrotitanium from Ilmenite by Electrolysis-Assisted Calciothermic Reduction in CaCl2-NaCl Molten Salt

Thermolytic Formation Of Iro2+Ta2o5 Mixed Oxides Anodes Made From Chloride Precursors

Negative magnetization, shielding current effect and divalent manganese in CaMn1-Ta O3 manganites

Thermodynamic examination of inclusion modification and precipitation from calcium treatment to solidified steel

Beneficiation of Niobium and Tantalum from Tantalite Ore Using Physical and Chemical Processes

Selective Reduction of Niobium(V) Species to Promote Molecular Niobium/Tantalum Separation