Abstract:Model analysis of re‐using clean wafers recovered from end‐of‐life modules, as feedstock for Cz ingot growth. Presentation of technical and economic constraints, particularly, dealing with dopants and impurities. Illustrating opportunity from tandem technology to boost p‐type efficiency and reduce sensitivity to recombination lifetime. This paper investigates, by modeling, the potential for high‐value recycling of silicon wafers recovered from end‐of‐life PV modules. Technology for PV module recycling is making steady progress, both at recycling companies and R&D institutes, and it is possible that as a result, soon a stream of wafers or wafer fragments recovered from waste modules will become commercially available. Recycling the silicon for manufacturing of new PV modules is an opportunity both for reduction of cost and reduction of environmental footprint of PV. In this paper, we analyze possibilities for recycling of wafer fragments as feedstock for new silicon ingot growth. This could save up to about 0.16 kWh/Wp energy for production of the new PV system. Compared with lower value applications of the recovered silicon, the potential value and energy savings when used as feedstock for ingot growth are considerably higher. This paper presents the possibilities and challenges for recycling wafer fragments from the point of view of dopant type and resistivity control, and mitigation of the impact of recombination activity from possible increased impurity levels or related to boron. Because in current PV production a rapid transition to n‐type wafer doping is taking place, the paper also considers the question what can be done with p‐type doped recycled wafer material. We illustrate how application for perovskite–silicon tandem cells helps to mitigate possible performance loss from metallic impurities or boron. The application in tandem cells is perhaps the only realistic approach to make economically worthwhile use of recycled B‐doped silicon as feedstock for silicon ingot growth.

Growth of low-cost and high-quality monocrystalline silicon ingots by using split recycled seeds

Evaluation of Large-Scale Recycled Seed for Cast Monocrystalline Silicon: Defect Multiplication Mechanisms and Feasibility

Preparation of High-performance Multicrystalline Silicon Ingot Based on Innovative Seeding Strategy for Recycled Seeds

Collaborative R&D Between Multicrystalline Silicon Ingots and Battery Efficiency Improvement—effect of Shadow Area in Multicrystalline Silicon Ingots on Cell Efficiency

Improving quality of cast monocrystalline Si ingot with seed crystal strips and graphite soft felt

Reusability of Contaminated Seed Crystal for Cast Quasi-Single Crystalline Silicon Ingots

A High-Efficiency and Energy-Saving Method for Purifying Industrial Silicon for Silicone Use

Seed-assisted Cast Quasi-Single Crystalline Silicon for Photovoltaic Application: Towards High Efficiency and Low Cost Silicon Solar Cells

Multicrystalline Silicon Assisted by Polycrystalline Silicon Slabs As Seeds

Seed-Assisted Growth of Cast-Mono Silicon for Photovoltaic Application: Challenges and Strategies

Higher quality composite silicon ingot with monocrystalline and multicrystalline bricks

Toward sustainability for upcycling SoG-Si scrap by an immersion rotational segregation purification process

Higher Quality Mono-Like Cast Silicon with Induced Grain Boundaries

Effects of impurity barrier layer on the red zone at the bottom of cast monocrystalline Si ingot for solar cells

Recycling of silicon scraps by electron beam melting coupled with directional solidification and its mechanism of impurity removal

Improve Solar Cell Performance of High-Performance Multicrystalline Silicon Seeded with Low-Cost Compact Nucleation Layer

Multicrystalline Silicon Crystal Assisted by Silicon Flakes As Seeds

(Invited) Defects in Cast-Mono Crystalline Silicon

Potential for Recycled Silicon Solar Cells as Feedstock for New Ingot Growth

Preservation of Seed Crystals in Feedstock Melting for Cast Quasi-Single Crystalline Silicon Ingots

Designing Functional Σ13 Grain Boundaries at Seed Junctions for High-Quality Cast Quasi-Single Crystalline Silicon