Design and performance of a modular 1 kilowatt-level thermoelectric generator for geothermal application at medium-low temperature
Heping Xie,Tianyi Gao,Xiting Long,Licheng Sun,Jun Wang,Entong Xia,Shuheng Li,Biao Li,Cunbao Li,Mingzhong Gao,Zhengyu Mo
DOI: https://doi.org/10.1016/j.enconman.2023.117782
IF: 10.4
2023-10-25
Energy Conversion and Management
Abstract:Thermoelectricity technology offers a new perspective for the development of geothermal energy but its large-scale application still remains challenges. Modularization of the thermoelectric generator (TEG) is a potential solution for scaling-up the installed capacity of a TEG. In this study, a modular 1 kilowatt-level TEG system mainly consisting of 32 modular TEG units was designed and tested. Each unit incorporated 24 thermoelectric modules (TEMs), which are arranged into 4 layers and sandwiched between 5 compact heat exchangers. Working fluids flow through the heat exchangers with an alternate 3-cold-2-hot configuration in a unit. Counter-flow of hot and cold water in adjacent heat exchangers creates uniform temperature distribution at both sides of the TEMs. The TEG system employed an integrated design. 32 TEG units along with four manifolds were placed in the lower cabinet, the upper cabinet housed the data acquisition and control system, enabling a comprehensive assessment of the system. Laboratory tests were conducted under various operation conditions, the system achieved a maximum output power of 1043.9 W, a thermoelectric conversion efficiency of 1.81%, and a volumetric power density of 10.21 kW/m 3 at the hot and the cold water temperatures of 91.0 °C and 15.0 °C, respectively. Under the same cooling conditions, an extensive prediction indicates that if the hot water temperature increased to 150 °C (cooling water temperature of 15 °C), the maximum output power and corresponding volumetric power density of the TEG system would reach 3188.6 W and 31.89 kW/m 3 , respectively. The test results validated the feasibility of the modular technology and highlighted its potential for widespread application of medium-low temperature geothermal energy. Further optimization strategies such as using more compact heat exchangers, devising a more efficient layout scheme for the TEG units, and improving the structure of the manifolds are essential for enhancing the performance and compactness of the TEG system.
energy & fuels,thermodynamics,mechanics