Abstract:In recent years, humanity has experienced the effects of using unsustainable energy sources that pollute the environment while being inefficient. Most of the primary energy input used in energy conversion processes is lost in the form of heat. Thermoelectric generators (TEGs) have the potential to recover some of this wasted heat; however, their low energy conversion efficiency needs to be addressed. Previous literature has shown effective optimization of thermoelectric generation systems through statistical tools such as the Taguchi method that optimized all the parameters that affect the outcome of the system. To this date, no research has considered wind speed for convection heat transfer as one of the optimizable parameters. This study aims to optimize the operating conditions of commercially available TEGs that are cooled by forced convection simulating naturally occurring wind speeds and operate under low-quality waste heat temperatures to improve the TEG performance further. Two commercially available TEGs are optimized via the Taguchi method. The Taguchi method is implemented with three parameters and three levels, making an L 9 orthogonal array. The objective function is the maximum output power. The optimized parameters are the hot side temperature, the heat sink size, and the wind airspeed. Analysis of variance (ANOVA) is used alongside the Taguchi orthogonal array for the statistical analysis of the results. The optimization results show that the hot side temperature is the most influential parameter to the output power. In addition, the change in the heat sink size also significantly influences the output power, whereas the impact of the wind speed is not as significant. In addition, interaction analysis between the parameters is performed. The Taguchi method yields satisfactory optimization results. The optimized system yields 0.65 W of power at 140 °C hot side temperature, Model K402 heat sink, and 3.7 m·s −1 wind speed. The influence of the air velocity of 1.73% is minimal on the output power compared to the hot side temperature, with a level of influence of 75.67% and a heat sink size of 22.43% for the shorter module. The results also show that the TEG with a smaller TE leg height yields the best output power at low load resistance ranging from 0.2 Ω to 2 Ω, as the TEG with a taller TE leg renders better performance at higher load resistance ranging from 3 Ω to 16 Ω at the optimal conditions. The results show that the hot side temperature remains the most important parameter in the optimization process. Furthermore, convection cooling from naturally occurring winds has a minimal but positive effect on the output of the presented TEG system.

A Novel Optimization Method for TEG System Performance Based on Temperature and Heat Flux

Design Optimization of Thermoelectric Cooling Systems for Applications in Electronic Devices

Parametric Characteristics and Optimization of a Novel Near-Field Thermophotovoltaic and Thermoelectric Hybrid System for Energy Harvest

Taguchi optimization and analysis of variance for thermoelectric generators with forced convection air cooling

Inverse optimization investigation for thermoelectric material from device level

Thermal management of a flexible controlled thermoelectric energy conversion-utilization system using a multi-objective optimization

Optimal design of a high-performance heat exchanger for modular thermoelectric generator towards low-grade thermal energy recovery

Experimental study of optimization of thermoelectric modules' number and layout for waste heat recovery

Design of Bi2Te3-based thermoelectric generator in a widely applicable system

Performance optimization of a class of combined thermoelectric heating devices

A comprehensive review of thermoelectric generation optimization by statistical approach: Taguchi method, analysis of variance (ANOVA), and response surface methodology (RSM)

Analyzing and optimizing the power generation performance of thermoelectric generators based on an industrial environment

Multiparameter optimization of the thermoelectric module under the constant heat flux condition

Analysis on optimal length scale of thermoelectric generators when using different circuit layouts

Impact of internal connections and heat loss on simulated large-scale low-temperature thermoelectric generation system

Design and optimization of three segmented thermoelectric generator for nuclear reactor application

Numerical analysis of thermoelectric power generation coupled with temperature-dependent material properties

Performance analysis and design optimization of a compact thermoelectric generator with T-Shaped configuration

Performance Investigation and Optimization of an L-type Thermoelectric Generator

Performance evaluation and improvement of thermoelectric generators (TEG): Fin installation and compromise optimization

Performance Analysis of Variable Cross-Section TEGs under Constant Heat Flux Conditions