Abstract:Thermoelectric generator (TEG) with improved performance is a promising technology in power supply and energy harvesting. Existing studies primarily adopt constant material properties to investigate TEG performance. However, thermoelectric (TE) material properties are subjected to considerable variations with temperature. Thus, reasonable doubts have risen concerning the influence level of temperature-dependent material properties on TEG performance. To solve this problem, an efficient and a comprehensive one-dimensional numerical model is developed to fully consider the third-order polynomial temperature-dependent thermal conductivity, Seebeck coefficient, and electrical resistivity. Control volume and finite difference algorithms are compared, and experiments are conducted to verify the developed numerical model. The temperature distribution along the TE leg obviously differs from the parabolic shape, which is a classic temperature distribution under the assumption of constant material properties. Insights find that the local change rate of thermal conductivity and Thomson effect are the essential reasons for the abovementioned phenomenon. It has been found that Thomson heat is released in the part of the leg near the cold-end, whereas it is absorbed in the remaining parts of the leg near the hot-end. The electric power on the basis of constant material properties is confirmed to be accurate enough by the developed numerical model, but the parabolic shape of the TE efficiency can be only obtained when temperature-dependent material properties are considered. Furthermore, it is wise to improve the TE efficiency by structural optimization. The present work provides an efficient and a comprehensive one-dimensional numerical model to include temperature-dependent material properties. New insights into the temperature and heat flux distribution, Thomson influence, and structural optimization potential are also presented for the in-depth understanding of the TE conversion process.

Performance optimization of a class of combined thermoelectric heating devices

Design Optimization of Thermoelectric Cooling Systems for Applications in Electronic Devices

Heating load, COP and exergetic efficiency optimizations for TEG-TEH combined thermoelectric device with Thomson effect and external heat transfer

Optimization of heat sink of thermoelectric cooler using entropy generation analysis

Optimization of A Trapezoid-Type Two-Stage Peltier Couples for Thermoelectric Cooling Applications

Thermal management of a flexible controlled thermoelectric energy conversion-utilization system using a multi-objective optimization

Performance Evaluation and Optimization of Air-to-Air Thermoelectric Heat Pump System

Optimum allocation of heat transfer surface area for heating load and COP optimisation of a thermoelectric heat pump

A Novel Optimization Method for TEG System Performance Based on Temperature and Heat Flux

A Model to Evaluate the Device-Level Performance of Thermoelectric Cooler with Thomson Effect Considered

Performance enhancement of a novel thermoelectric self-cooling system for electronic devices

Thermodynamic Analysis of TEG-TEC Device Including Influence of Thomson Effect

Real-time optimization of thermoelectric coolers' performance based on energy and exergy analysis

Numerical analysis of thermoelectric power generation coupled with temperature-dependent material properties

Simultaneous optimization of cooling temperature difference and efficiency for multi-stage thermoelectric device

Numerical Study and Optimization of a Combined Thermoelectric Assisted Indirect Evaporative Cooling System

Multiparameter optimization of the thermoelectric module under the constant heat flux condition

Optimal design of a high-performance heat exchanger for modular thermoelectric generator towards low-grade thermal energy recovery

Inverse optimization investigation for thermoelectric material from device level

Performance evaluation and improvement of thermoelectric generators (TEG): Fin installation and compromise optimization

Optimizing a thermoelectric window frame for heating and cooling: A cross-validated simulation study