Abstract:There is a huge demand to accurately determine the magneto-electrical properties of particles in the nano sized regime due to the modern IC technology revolution and biomedical application science. In this paper, we present a microwave waveguide measurement technique for complex permeability and permittivity of expensive nano sized magnetic powder materials. In the measurement process, Agilents 8510C vector network analyzer was used to have a standard TRL calibration for free space inside the waveguides. In order to maintain the recommended insertion phase range, a very thin prepared sample was loaded inside the calibrated waveguide. Also, the loaded materials magnetic and dielectric effects were considered into the cutoff wavelength of the propagation constant of the TE10 wave from the geometrical dimensions of the waveguides. This makes the measured permeability and permittivity more reliable than commonly used techniques. The six different compounds of nano sized ferrite powders (Fe3O4, CuFe2O4, CuFe2O4Zn, Fe2NiO3Zn, BaFe12O19, and SrFe12O19), in which the average diameter of nano particles is less than 40nm were purchased from Sigma-Aldrich, Inc for measurement purposes employing this technique. For industrial benefits, we present the complex permeability and permittivity on the frequency range from 3.95GHz to 5.85GHz. The measured results showed that the dielectric permittivity of these materials is quite different from those of solid state materials. Index Terms, Nano ferrites, waveguide technique, permeability, permittivity.

Permeability of magnetic materials tested by high-frequency calibration

Study of No-liquid Calibration Technique for the Medium-and-large Diameter Electromagnetic Flowmeter

Low Frequency (100 Khz–1 MHz) Permeability Measurement Method in Magnetic Material

Testing and Analysis Method of Low Remanence Materials for Magnetic Shielding Device

Magnetic field generator for the calibration of magnetometers and electromagnetic compatibility (EMC) and electromagnetic interference (EMI) compliance

Development of Measurement for High Frequency Permeability of Magnetic Thin Films

Power Loss Measurement System for Soft Magnetic Materials in Megahertz Frequencies

Measuring magnetic field coil constants based on atomic magnetometry and fluxgate magnetometry

Modifying Factor for Determining Broadband Complex Permeability of Magnetic Thin Films

Soft magnetic materials for sensor applications in the high frequency range

Measuring the Microwave Magnetic Permeability of Small Samples Using the Short-Circuit Transmission Line Method

Nano Ferrites Microwave Complex Permeability and Permittivity Measurements by T/R Technique in Waveguide

Magnetic Calibration System With Interference Compensation

Accuracy Investigation of High-Frequency Core Loss Measurement for Low-Permeability Magnetic Materials

Calculation Methodologies of Complex Permeability for Various Magnetic Materials

Evaluation of Magnetic Materials for Very High Frequency Power Applications

An Improved Cavity-Perturbation Approach for Simultaneously Measuring the Permittivity and Permeability of Magneto-Dielectric Materials in Sub-6G

Method of Improving the Measurement Accuracy of Magnetic Material Characteristic for Open Circuit Test Specimen

Performance of a Radio-Frequency Two-Photon Atomic Magnetometer in Different Magnetic Induction Measurement Geometries

Magnetic property measurement and analysis of high-frequency soft magnetic materials under non-sinusoidal excitation considering temperature effect

Challenges of Measuring the Complex Permittivity and Permeability of Thin Materials in Millimeter Wave Regimes (140Ghz–220ghz)