Abstract:The precise measurement of weak magnetic fields by using high-sensitivity magnetometers is not only widely used, but also promotes the development of many research fields. The magnetic field measurement capability of the magnetometer determines the potential and scope of its application, which means that research on its magnetic field measurement capability is essential.In this work, we develop a rubidium-xenon vapor cell atomic magnetometer. The cell filled with 5-torr 129Xe, 250-torr N2 and a droplet of enriched 87Rb is placed in the center of a five-layer magnetic shield with four sets of inner coils to control the internal magnetic field environment. In the cell, 129Xe is polarized by spin exchange collisions with 87Rb atoms, which are pumped with a circularly polarized laser beam at the D1 transition. If magnetic fields or pulses are applied to the cell, the polarization state of 87Rb and 129Xe will change and evolve, whose evolution process can be described by a pair of Bloch equations. The analysis of the Bloch equations indicates that the rubidium-xenon vapor cell atomic magnetometer can measure magnetic fields by two different methods. The magnetic field measurement capabilities of the two methods are experimentally calibrated respectively. The first method is to measure the alternating current (AC) magnetic fields by measuring the influence of the external magnetic fields on the polarization of the 87Rb atoms. The experimental results show that the sensitivity of the AC magnetic field measurement is about \begin{document}$1.5\;{{{\rm{pT}}} / {\sqrt {{\rm{Hz}}} }} $\end{document} in a frequency range of 2100 Hz, and the bandwidth is about 2.8 kHz. The second method is to measure the static magnetic fields by measuring the Larmor frequency of the hyperpolarized 129Xe in the cell. Considering that its measurement accuracy is limited by the relaxation of the hyperpolarized 129Xe, the transverse and longitudinal relaxation time are measured to be about 20.6 s and 21.5 s, respectively. Then, the experimental calibration results indicate that the static magnetic field measurement precision is about 9.4 pT and the measurement range exceeds 50 μT, which prove that the static magnetic field measurement can still be performed under geomagnetic field (50 μT). The rubidium-xenon vapor cell atomic magnetometer enables the measurement of AC magnetic fields and static magnetic fields in the same system. Compared with the spin exchange relaxation free (SERF) atomic magnetometer, the rubidium-xenon vapor cell atomic magnetometer has some unique advantages. For AC magnetic field measurement, it has a wider frequency range. For static magnetic field measurement, it can be performed under geomagnetic field and can give the magnetic field measurement value without using the calibration parameters of the system. These characteristics make the rubidium-xenon vapor cell atomic magnetometer have broad application prospects. It is expected to be applied to geomagnetic surveys, basic physics and other aspects of research.

Measuring magnetic field coil constants based on atomic magnetometry and fluxgate magnetometry

A Calibration Method for Coil Constants Using an Atomic Spin Self-Sustaining Vector Magnetometer

Calibration of Magnetic Field Measurement Capability of Rubidium-Xenon Vapor Cell Atomic Magnetometer

Triaxial coils in-situ calibration method based on measuring the alternating magnetic field-induced dynamic response of the SERF magnetometer

In Situ Calibration of Magnetic Coil System Using Ellipticity-Induced Bell-Bloom Magnetometer

Study on the calibration method for tri-axis fluxgate gradiometer

Study on the steering differential calibration method for magnetic gradiometer base on tri-axis fluxgate

Calibration of the coil constants and nonorthogonal angles of triaxial NMR coils based on in-situ EPR magnetometers

In Situ Calibration of Magnetic Field Coils Using Parametric Resonance in Optically-pumped Magnetometers

A New System for Calibrating a Pulsed Field Magnetometer

Error Calibration Method for Magnetic Gradiometer Base on Least Square

The Method for Measuring the Non-Orthogonal Angle of the Magnetic Field Coils of a K-Rb-21Ne Co-Magnetometer

Magnetic Field Estimation in Measurement Dead Domain for Dry Calibration of Electromagnetic Flowmeter

Calibration of Three-Axis Fluxgate Magnetometers with Nonlinear Least Square Method

In-Situ Measurement of Electrical-Heating-Induced Magnetic Field for an Atomic Magnetometer.

A Method for Calibrating Coil Constants by Using an Atomic Spin Co-Magnetometer

Magnetic Field Measurement With Improved Scale Factor Based on a Dual-Loop Optoelectronic Oscillator With Vernier Effect Using a Cascaded GMM-FBG and Monel-400-FBG

Measurement of cardiac magnetic field based on atomic magnetometry

On-Site Synchronous Determination of Coil Constant and Nonorthogonal Angle Based on Electron Paramagnetic Resonance.

A Highly Sensitive In Situ Magnetic Field Fluctuation Measurement Method Based on Nuclear-Spin Depolarization in an Atomic Comagnetometer

Bias and linearity measurement of three axis fluxgate magnetometers using high precise electromagnetic devices