On the Method for Evaluating the Sensitivity to Reheat Cracking in the Weld Zone of Steel

Toshiro Kikuchi,Iwao Onishi

DOI: https://doi.org/10.2320/matertrans1960.19.341

1978-01-01

Transactions of the Japan Institute of Metals

Abstract:The present authors have assumed that the sensitivity of steel to reheat cracking can be most appropriately evaluated by its own plastic deformability.Based on this assumption, the authors undertook a study of reheat cracking testing of steel by means of the stress relieving test, and of the method for evaluating the sensitivity of steel to reheat cracking.The results of the study obtained are summaraized as follows:(1) The reheat cracking test method using the weld thermal-restraint stress and the strain cycle simulator has the advantage in that it allows the test to be made continuously during the heating and holding processes.(2) Judging from the results of the reheat cracking test using the weld-reinforced test pieces, it is evident that the characteristic phenomena of reheat crackings such as the cracking position, propagation process of cracks, geometry of the cracked fracture surface, and crack initiation temperature coincide with those obtained by others workers.(3) It is made clear, furthermore, that the sensitivity of steel to reheat cracking may be evaluated from the amount of plastic deformation, Δlp′ measured at the time of occurrence of cracking.