Abstract:“Blind holes” are the main reasons for the reduced performance of microgas sensor carriers. To improve the “blind hole” of catalytic combustion methane sensors and therefore, their thermal stability, this study presents a numerical simulation of the catalytic combustion in an Al2O3− oriented ceramic array involving porous microthermal plates. A three-visualization model of the sensor is established using the FLUENT software, and the simulation results are systematically analyzed based on the dynamics and thermodynamic mechanism of the microgas sensor. The results show that the regularity of the surface reaction presents a circular distribution, with the center line of the channel serving as the axis symmetry. The total reaction velocity in the array hole increases gradually from the inlet to the outlet. The flow velocity at the inlet should be controlled at more than 1 × 10−8 m/s, which is more accurate compared with the concept of “uniform velocity” in previous studies. The optimum pore size at the inlet should be 150 nm, and the inner pore size of the wall should be slightly higher than 300 nm, which is a more careful division compared with previous pore-size studies. The efficient reaction position is from the inlet to the quarter of the hole. The simulation results make up for the deficiencies in the analysis of the process parameters of the methane sensor carrier array hole and the internal reaction change process, as well as provide innovative comments on the sensor structure design. Through digital simulations, the limitations associated with the experiments can be avoided, the theoretical study can be improved, theoretical support can be provided for experiments related to the improvement of thermal stability, the predictability of experiments can be improved, and the feasibility of the research proposal can be verified. These steps are important for the improvement of the “blind hole” problem of catalytic combustion methane sensors.

Evaluation of Micro Catalytic Combustor Using Tape-casting Ceramic Structure

Effect of Thermal Property of Materials on Micro-scale Catalytic Combustion for the Micro Combustor

Direct ink writing of Pd-Decorated Al<sub>2</sub>O<sub>3</sub> ceramic based catalytic reduction continuous flow reactor

Combustion of hydrogen–air in catalytic micro-combustors made of different material

Combustion of Hydrogen-Air in Micro Combustors with Catalytic Pt Layer

The Surface and Gas-Phase Reactions in Microscale Catalytic Partial Oxidation of N-Butane/air Mixture

Characteristics of Premixed Catalytic Combustion of Nature Gas

Preparing Two-Dimensional Nano-Catalytic Combustion Patterns Using Direct Inkjet Printing

Exploring the Combustion Mechanism of Single Micron-Sized Aluminum Particles with a Numerical Model

Preparation of Nickel-Foam-supported Pd/NiO Monolithic Catalyst and Construction of Novel Electric Heating Reactor for Catalytic Combustion of VOCs

Catalytic combustion characteristics of CH 4 in the micro cavity‐combustor under different types of air inlet distribution

Experimental study of premixed n-heptane/air catalytic combustion characteristics in micro-cylindrical tube

Experimental and modelling studies of the catalytic combustion of methane

Ignition Characteristics of N-Butane/oxygen-enriched Air Mixture in Catalytic Micro-Channel

Numerical Simulation of Catalytic Methane Combustion in Al2O3 Directional Nanotubes Modified by Pt and Pd Catalyst

Methane/Air Fuel-Rich Combustion in a Catalyst Enhanced Two-Layer Porous Media Burner

Catalytic Self-Sustaining Combustion of the Alkanes with Pt/ZSM-5 Packed Bed in a Microscale Tube

Numerical Simulation of Catalytic Combustion of CH4 in a Micro-burner

Effect of a palladium catalyst and initial pressure on methane-air catalytic combustion process in a helical coil microchannel: A molecular dynamics approach

Numerical Analysis of the Catalytic Combustion of Premixed Methane/Air Mixtures in Microtubes

Preparation of aluminum borate whiskers/CoxCr3‐xO4 catalysts on channel surface of cordierite honeycomb ceramic for soot catalytic combustion