Abstract:Syngas production by the partial oxidation reforming of methane is a promising technology with a simple setup and quick dynamic response, which has great potential for application in small-scale fuel cells and portable power units. In this study, a catalytically enhanced porous media combustor for partial oxidation reforming is designed and tested. In the combustor, fuel-rich combustion in porous media and catalytic partial oxidation are integrated, benefitting from the merits of both technologies. Without external heat source, the combustor is directly ignited with a stoichiometric gas mixture during the cold startup process, and then adjusted to the partial oxidation conditions. Three zones, a preheating zone, an oxidation zone involving exothermic reactions, and a reforming zone involving endothermic reactions, are observed, which significantly affect the temperature profile in the axial direction. Considering both the methane conversion and reforming efficiency, the optimal equivalence ratio range for self-sustained operation is found to be 2.0-2.4. At an equivalence ratio of 2.0, the effect of the gas velocity on the temperature profile and gas composition of products are studied experimentally. At an equivalence ratio of 2.4 and a gas velocity of 0.13 m/s, the reforming efficiencies of the reactor reach 61.5% and 64.8% when 0.5 wt% Pd and 0.5 wt% Rh, respectively, are introduced to the second layer of the porous media. The carbon deposition at different axial positions of the reactor is analyzed, and the results indicate that carbon deposition by methane pyrolysis in the high-temperature oxidation zone is the dominating cause of carbon deposition. A re-ignition process at stoichiometric condition is helpful for the elimination of carbon.

Catalytic Self-Sustaining Combustion of the Alkanes with Pt/ZSM-5 Packed Bed in a Microscale Tube

Catalytic combustion of methane, methanol, and ethanol in microscale combustors with Pt/ZSM-5 packed beds

Experimental study of premixed n-heptane/air catalytic combustion characteristics in micro-cylindrical tube

Comparison of catalytic combustion of methane andn-butane in microtube

Dimensional Effect on Self-Sustaining Catalytic Combustion of N-Heptane in Micro/Meso Tubes

Performance of a catalytic micro-combustor based on Pt/Al 2 O 3 /Ni for methanol fuel cell application

Catalytic combustion of propane over PdxPty-ZSM-5/Cordierite monolithic catalyst

Experimental and modelling studies of the catalytic combustion of methane

Catalytic combustion and kinetic characteristics of n-butanol with Pt/ZSM-5 particles in meso channel

Experiments on N-Heptane Combustion with Two Types of Catalyst Layouts

Effects of Hydrogen Addition on Methane Catalytic Combustion in a Microtube

Catalytically Enhanced Methane-Rich Combustion by Porous Media Reactor

Combustion of Hydrogen-Air in Micro Combustors with Catalytic Pt Layer

Methane/Air Fuel-Rich Combustion in a Catalyst Enhanced Two-Layer Porous Media Burner

Pt-loaded ellipsoidal nanozeolite as an active catalyst for toluene catalytic combustion

Highly Efficient Oxidation of Propane at Low Temperature over a Pt-Based Catalyst by Optimization Support

Catalytic Combustion of Ultra-Low Heating Value Fuels over 0.5%Pd/zro2/γ-Al2o3 Catalyst

Elementary Reaction Modeling and Experimental Characterization on Methane Partial Oxidation within a Catalyst-Enhanced Porous Media Combustor

Activation of Methane Using Propane As Co-Reactant over Cu-Zn/Hzsm-5 Catalyst

Catalytic Combustion of Propane over Zr-Modified Co3O4 Catalysts: an Experimental and Theoretical Study

Insights into the promotion mechanism of ceria-zirconia solid solution to ethane combustion over Pt-based catalysts