Abstract:Syngas production by the partial oxidation reforming of methane is a promising technology with a simple setup and quick dynamic response, which has great potential for application in small-scale fuel cells and portable power units. In this study, a catalytically enhanced porous media combustor for partial oxidation reforming is designed and tested. In the combustor, fuel-rich combustion in porous media and catalytic partial oxidation are integrated, benefitting from the merits of both technologies. Without external heat source, the combustor is directly ignited with a stoichiometric gas mixture during the cold startup process, and then adjusted to the partial oxidation conditions. Three zones, a preheating zone, an oxidation zone involving exothermic reactions, and a reforming zone involving endothermic reactions, are observed, which significantly affect the temperature profile in the axial direction. Considering both the methane conversion and reforming efficiency, the optimal equivalence ratio range for self-sustained operation is found to be 2.0-2.4. At an equivalence ratio of 2.0, the effect of the gas velocity on the temperature profile and gas composition of products are studied experimentally. At an equivalence ratio of 2.4 and a gas velocity of 0.13 m/s, the reforming efficiencies of the reactor reach 61.5% and 64.8% when 0.5 wt% Pd and 0.5 wt% Rh, respectively, are introduced to the second layer of the porous media. The carbon deposition at different axial positions of the reactor is analyzed, and the results indicate that carbon deposition by methane pyrolysis in the high-temperature oxidation zone is the dominating cause of carbon deposition. A re-ignition process at stoichiometric condition is helpful for the elimination of carbon.

Catalytic combustion of methane, methanol, and ethanol in microscale combustors with Pt/ZSM-5 packed beds

Catalytic Self-Sustaining Combustion of the Alkanes with Pt/ZSM-5 Packed Bed in a Microscale Tube

A highly active Pd/H-ZSM-5 catalyst in lean methane combustion prepared <i>via</i> a sol-gel method and treated by reduction-oxidation

Mesoscale Combustion of Ethanol and Dimethyl Ether over Pt/ZSM-5: Differences in Combustion Characteristics and Catalyst Deactivation

Performance of a catalytic micro-combustor based on Pt/Al 2 O 3 /Ni for methanol fuel cell application

Experimental study of premixed n-heptane/air catalytic combustion characteristics in micro-cylindrical tube

Methane/Air Fuel-Rich Combustion in a Catalyst Enhanced Two-Layer Porous Media Burner

Lean Methane Premixed Combustion over a Catalytically Stabilized Zirconia Foam Burner

Experiments on N-Heptane Combustion with Two Types of Catalyst Layouts

Elementary Reaction Modeling and Experimental Characterization on Methane Partial Oxidation within a Catalyst-Enhanced Porous Media Combustor

Enhanced Catalytic Efficiency of Pt Nanoparticles Supported on 3D Ordered Macro-/Mesoporous Ce0.6 Zr0.3 Y0.1 O2 for Methane Combustion.

Catalytic Combustion of Ultra-Low Heating Value Fuels over 0.5%Pd/zro2/γ-Al2o3 Catalyst

Comparison of catalytic combustion of methane andn-butane in microtube

Catalytically Enhanced Methane-Rich Combustion by Porous Media Reactor

Catalytic combustion and kinetic characteristics of n-butanol with Pt/ZSM-5 particles in meso channel

Catalytic performances in methane combustion over Pd nanoparticles supported on pure silica zeolites with different structures

Experimental and modelling studies of the catalytic combustion of methane

Pt-loaded ellipsoidal nanozeolite as an active catalyst for toluene catalytic combustion

Catalysis: Enhanced Catalytic Efficiency of Pt Nanoparticles Supported on 3D Ordered Macro‐/Mesoporous Ce0.6Zr0.3Y0.1O2 for Methane Combustion (small 20/2015)

Preparation of monolithic Pd/ZSM-5/Cordierite catalyst for the combustion of lean methane

Premixed lean methane/air combustion in a catalytic porous foam burner supported with perovskite LaMn0.4Co0.6O3 catalyst with different support materials and pore densities