Abstract:As one of the potential candidates for fuel surrogates, n-heptane has been the focus of numerous oxidation and combustion studies. In this work, n-heptane combustion in cylinder tubes with diameters of 2, 3, and 4 mm was investigated experimentally with the use of packed catalyst beds of Pt/Ce0.8Zr0.2O2 to study the mechanism of self-sustaining combustion and the dimensional effects of the inner diameter of a tube combustor. The region of self-sustaining stable combustion, the tube wall temperature, and the combustion efficiency were examined. n-Heptane can maintain self-sustaining stable combustion in the three tubes even if the wall temperature was below 430 K. As the equivalence ratio (Phi) increased, the stability region of the Reynolds number (Re) was expanded at the expense of fuel wastage. The lower stability limit of Re decreased as the tube diameter increased, and the value could reach as low as 12 in the tube with a diameter of 4 mm. The equivalence ratio was the dominant factor of the wall tube temperature at the lower boundary, whereas Re was significant at the upper boundary. An optimal Re allowed for the achievement of the highest wall temperature, and the optimal Re was high with a small diameter. The tube with a large diameter presented both a high combustion efficiency and high heat release rate. Combustion efficiency was improved by 40% when the diameter of the tube increased from 2 to 4 mm, and over 80% combustion efficiency was achieved in the d = 4 mm tube at Phi = 2. Under a fuel-rich condition, the tube combustor outputted heat energy at a low rate and emitted heat to the atmosphere at a high rate. This resulted in the wastage of a massive ratio of the input fuel.

Experimental study of premixed n-heptane/air catalytic combustion characteristics in micro-cylindrical tube

Dimensional Effect on Self-Sustaining Catalytic Combustion of N-Heptane in Micro/Meso Tubes

Catalytic Self-Sustaining Combustion of the Alkanes with Pt/ZSM-5 Packed Bed in a Microscale Tube

Experiments on N-Heptane Combustion with Two Types of Catalyst Layouts

Characteristics of Premixed Catalytic Combustion of Nature Gas

Numerical simulation of premixed n-heptane/air combustion in micro tube with internal channel optimization

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Catalytic combustion of methane, methanol, and ethanol in microscale combustors with Pt/ZSM-5 packed beds

THE EXPERIMENTAL STUDY OF HYDROGEN AND AIR PREMIXED COMBUSTION IN MICROSCALE T STYLE TUBE

Numerical Analysis of the Catalytic Combustion of Premixed Methane/Air Mixtures in Microtubes

Combustion of Hydrogen-Air in Micro Combustors with Catalytic Pt Layer

Experimental study of low-temperature combustion performance in hydrogen/air mixtures over Pt–Cu/HZSM-5/cordierite bimetallic catalysts

Combustion of hydrogen–air in catalytic micro-combustors made of different material

Effect of Thermal Property of Materials on Micro-scale Catalytic Combustion for the Micro Combustor

Catalytic Combustion of N-C4h10and DME in Swiss-Roll Combustor with Porous Ceramics

Investigation on H2/CH4 fueled combustion with partially Pt-loaded porous media

Effect of a palladium catalyst and initial pressure on methane-air catalytic combustion process in a helical coil microchannel: A molecular dynamics approach

Effect of Catalyst Length and Hydrogen Addition on the Combustion Characteristics of N-Butane in A Catalytic Swiss-Roll Combustor

Experimental and modelling studies of the catalytic combustion of methane

Methane/Air Fuel-Rich Combustion in a Catalyst Enhanced Two-Layer Porous Media Burner

Effects of Hydrogen Addition on Methane Catalytic Combustion in a Microtube