Influence of Porous Media Aperture Arrangement on CH4/Air Combustion Characteristics in Micro Combustor
Fei Wang,Xueming Li,Shuai Feng,Yunfei Yan
DOI: https://doi.org/10.3390/pr9101747
IF: 3.5
2021-09-29
Processes
Abstract:Micro-electro-mechanical systems (MEMS) occupy an important position in the national economy and military fields, and have attracted great attention from a large number of scholars. As an important part of the micro-electromechanical system, the micro-combustor has serious heat loss due to its small size, unstable combustion and low combustion efficiency. Aiming at enhancing the heat transfer of the micro-combustor, improving the combustion stability and high-efficiency combustion, this paper embedded porous media in the combustor, and the effects of different parameters on the combustion characteristics were numerically studied. The research results showed that the layout of porous media should be reasonable, and the small and large pore porous media embedded in the inner and outer layers, respectively, can bring better combustion performance. Meanwhile, A: 10–30 has a high and uniform temperature distribution, and its methane conversion rate reached 97.4%. However, the diameter ratio of the inner layer to the outer layer (d/D) of the porous medium should be maintained at 0.4–0.6, which brings a longer gas residence time, and further enables the pre-mixed gas to preheat and burn completely. At a d/D of 0.5, the combustor has the highest outer wall temperature and CH4 conversion efficiency. Besides, compared with the pore size increasing rate of Δn = 10 PPI and Δn = 10 PPI, the radial temperature distribution of the Δn = 10 PPI combustor is more uniform, meanwhile avoids the occurrence of local high temperature. Under the condition of Δn = 10 PPI, A: 20–30 layout maintains excellent thermal and combustion performance. In addition, the lean flammable limits of MC-U20, MC-10/30-0.8, and MC-20/30-0.5 were compared, at an inlet velocity of 0.5 m/s, the corresponding lean flammable limits are 0.5, 0.4, and 0.3, respectively, among them MC-20/30-0.5 has a wider flammable limit range, showing excellent combustion stability. This research has guiding significance for the combustion stability of the micro combustor.
engineering, chemical