Abstract:The atomic force microscope (AFM) can be used in dynamic tipping mode as an effective lithography technique capable of manufacturing nanometer sized devices on the surface of a silicon wafer with a higher resolution surface characterization. The most difficult challenge in fabrication of nanostructure based on AFM nano-oxidation approach is the way of controlling an electric field between a cantilever probe tip and a silicon wafer. A water bridge builds up between the tip and the wafer, resulting in the oxidation due to the high electric field in the region. A reconstructive AFM system for nano-oxidation with a tapping model, implemented in an air, was developed. The presented AFM implements the increasing of electric field intensity by analyzing the impact voltage from −1 V to −5 V, electric field, and ion concentrations at the ambient/oxide and oxide/silicon interfaces, while the growth of thin oxides assumes a single liquid/silicon interface, which is modeled as an infinitely long conducting plane. Therefore, particle distribution for the surface charge density is generated for topography simulations. Based on the control-parameters, an enhanced electrical field of up to 1010 V/m can be obtained, which provides a powerful support for controllable experimental study of nanostructures fabrication with AFM tip induced local anodic oxidation. This showed the dependence of applied voltage types and various nanostructures and life time of AFM tip, by controlling tip-sample position in nanolithography processes is an important factor for controlling the aspect electric field distribution. And the effect of different parameters on enhancement distribution was performed and analyzed in this paper.

Nanofabrication with the thermal AFM metallic tip irradiated by continuous laser

Controllable fabrication of Sub-20nm structures with coupling field tip enhancement effect induced by nanosecond pulsed laser irradiation

Nanofabrication mechanism of λ/20 features achieved by coupling field tip enhancement induced with nanosecond laser irradiating AFM probe tip

Microfabrication Assisted by Laser-Trapped Microparticle Tools

Nano-fabrication System Based on Atomic Force Microscopy

AFM Tip-Based Fabrication of Silicon Nanostructures with Reduced Subsurface Amorphous Layers

Fabrication of nanostructure on Au nano-film by nanosecond laser coupled with cantilevered scanning near-field optical microscopy probe

Advanced mechanism of multiphysics fields tip enhancement induced with varied laser power to fabricate pattern-transformable subdiffraction limit nanostructures

3-D finite element calculation of electric field enhancement for nanostructures fabrication mechanism on silicon surface with AFM tip induced local anodic oxidation

Fabrication of nanoscale to microscale 2.5D square patterns on metallic films by the coupling AFM lithography

Laser Nano-Engineering with the Assistance of Scanning Probe Microscope and Optical Resonance in Microparticles

Properties of M-AFM Probe Affected by Nanostructural Metal Coatings

Nanostructure Generation Based on Laser Cooling and Mechanical Mask

Laser multifunctional fabrication of metallic microthermal components embedded in fused silica for microfluidic applications

High-Temperature Imprinting and Superhydrophobicity of Micro/Nano Surface Structures on Metals Using Molds Fabricated by Ultrafast Laser Ablation

Study for Laser Controlled Fabrication of Micro/Nano-Structures of Silicon Based on Multi-Physics Model

Investigations on tip-based large area nanofabrication and nanometrology using a planar nanopositioning machine (NFM-100)

Surface Nano-fabrication by Laser Precision Engineering

Research on AFM tip-related nanofabrication of two-dimensional materials

Ultrasonic Nanofabrication with an AFM

Microscale Spatially Resolved Thermal Response of Si Nanotip to Laser Irradiation