Abstract:This paper presents a novel mechanical material removal method to produce nanostructures with a precise control of their three dimensional (3D) surface topography. The method employs the tip of an atomic force microscope (AFM) probe as the cutting tool and a closed-loop high precision stage to control the machining path of the tip. In this approach, the tip only describes vertical motions while the stage is actuated along lateral directions in a raster scan strategy. The machining of features with 3D nanoscale topography in this way is the combined result of the tip applying a constant normal load on the sample while varying the distance (i.e. the feed) between two parallel lines of cut. More specifically, an increased feed leads to a reduced machining depth and vice-versa. Thus, the main difference with mechanical milling or turning at such small scale is that this method relies on the control of the feed to determine the machined depth. To support the interpretation of the process outcomes, an analytical model is developed. This model expresses the relationship between the feed and the machined depth as a function of the contact area between the tip and the material. The critical achievable slope of produced nanostructures was derived from this model and validated using experimental tests. This parameter corresponds to the maximum inclination of the surface of a nanostructure that can be machined with the proposed method. From the knowledge of the critical slope, the machining of periodic nanostructures was demonstrated on a single crystal copper workpiece. In principle, the method reported here could be implemented to any instrument with micro- and nano-indentation capabilities by exploiting their load-control feedback mechanism.

Fabrication of nanoscale to microscale 2.5D square patterns on metallic films by the coupling AFM lithography

Nano-fabrication System Based on Atomic Force Microscopy

Experimental Study and Theoretical Analysis of the Nanometre-Scale Line Structure Fabrication by AFM Electric Lithography

AFM Tip-Based Fabrication of Silicon Nanostructures with Reduced Subsurface Amorphous Layers

3-D finite element calculation of electric field enhancement for nanostructures fabrication mechanism on silicon surface with AFM tip induced local anodic oxidation

Controllable fabrication of Sub-20nm structures with coupling field tip enhancement effect induced by nanosecond pulsed laser irradiation

Nanofabrication with atomic force microscopy.

Machining complex three-dimensional nanostructures with an atomic force microscope through the frequency control of the tip reciprocating motions

Optimization of Machining Parameters and Fabrication of Nanostructures Using AFM Anodic Oxidation

Highly Reproducible Nanolithography by Dynamic Plough of an Atomic-Force Microscope Tip and Thermal-Annealing Treatment

High Speed Atomic Force Microscope Lithography Driven By Electrostatic Interaction

Research on AFM tip-related nanofabrication of two-dimensional materials

SPM-based Nanofabrication Using a Synchronization Technique

Fabrication of Periodic Nanostructures Using AFM Tip-Based Nanomachining: Combining Groove and Material Pile-Up Topographies

AFM tip-based mechanical nanomachining of 3D micro and nano-structures via the control of the scratching trajectory

Fabrication of Large Scale Nanostructures Based on a Modified Atomic Force Microscope Nanomechanical Machining System.

Nanofabrication mechanism of λ/20 features achieved by coupling field tip enhancement induced with nanosecond laser irradiating AFM probe tip

A Large-Area Photolithography Technique Based on Surface Plasmons Leakage Modes

Nanodot Deposition and Its Application with Atomic Force Microscope

Fabrication of the Nanoscale Flat-Bottomed and Lamellar Structures on HOPG Surface by STM-Based Electric Lithography

Three Dimensional Molecular Dynamics Simulation of Nano-Lithography Process for Fabrication of Nanocomponents in Micro Electro Mechanical Systems (MEMS) Applications