Abstract:Atomic force microscopy (AFM) tip-based nanofabrication is as a powerful method to machine nanostructures. However, the traditional AFM scratching process suffers from low processing efficiency and a low rate of material removal. Thus, an AFM tip-based nanomilling method was previously proposed to improve the machining efficiency and material removal rate; however, the machining mechanism of the nanomilling process, especially on hard-brittle silicon crystals, is not well understood. In this study, we used an AFM tip-based nanomilling approach to machine nanochannels on single-crystal silicon to investigate the machining mechanism (i.e., the material removal state, undeformed chip thickness, the brittle-to-ductile transition, and subsurface damage). For the first time, we established a theoretical model for tip-based nanomilling with a constant normal load to predict the machined depth. Nanochannels fabricated with a wide range of feed directions, crystal orientations, and tip trajectories were obtained, which provided a reference for machining high-quality nanochannels and an in-depth understanding of the nanomilling of single-crystal silicon. The experimental results demonstrated that we could machine a nanochannel without pile-ups by selecting a specific trajectory with a feed smaller than 4 nm in the 0 degrees direction, a normal load no greater than 120 mu N, and a crystal orientation at rotation angles of 135 degrees, 157.5 degrees, or 180 degrees. Moreover, transmission electron microscope analysis of the subsurface of the nanochannel revealed a large number of dislocations, stacking faults, and a layer of amorphous silicon. Our findings are of great significance for obtaining high-quality nanochannels with a predicable machined depth and understanding the nanomilling mechanism of hard-brittle materials.

Mechanism of mechanical nanolithography using self-excitation microcantilever

Controllable Diamond Cutting of Structured Surfaces with Subnanometric Height Features on Silicon

Nanoscale cutting using self-excited microcantilever

Insight into Mechanics of AFM Tip-Based Nanomachining: Bending of Cantilevers and Machined Grooves

Nanoscale manipulation of materials patterning through thermomechanical nanolithography using atomic force microscopy

Investigation on AFM-based Micro/nano-Cnc Machining System

AFM tip-based mechanical nanomachining of 3D micro and nano-structures via the control of the scratching trajectory

AFM Tip-Based Fabrication of Silicon Nanostructures with Reduced Subsurface Amorphous Layers

A Design of Phase-Closed-Loop Nanomachining Control Based Ultrasonic Vibration-Assisted Afm

Atomic Force Microscope Using a Diamond Tip: a Tool for Micro/nanomachining on Single-Crystal Silicon Surface

Nano-fabrication System Based on Atomic Force Microscopy

Towards Understanding the Machining Mechanism of the Atomic Force Microscopy Tip-Based Nanomilling Process

Research on Micro Machining Using AFM Diamond Tip

Machining complex three-dimensional nanostructures with an atomic force microscope through the frequency control of the tip reciprocating motions

Depth Control Method of AFM-Based Nanomachining with Diamond Tip in Deflection Mode

Novel Micro-Machining Method Basing on AFM and High-Accuracy Stage

Measurement of Sub-Surface Microstructures Based on a Developed Ultrasonic Atomic Force Microscopy

Pulse force nanolithography on hard surfaces using atomic force microscopy with a sharp single-crystal diamond tip

Fabrication of nanoscale to microscale 2.5D square patterns on metallic films by the coupling AFM lithography

Nano-Machining of Monocrystalline Silicon by Atomic Force Microscope

Silicon Nanofabrication by Atomic Force Microscopy-Based Mechanical Processing