Abstract:Diamond-silicon carbide (SiC) polycrystalline composite blends are studied using a computational approach combining molecular dynamics (MD) simulations for obtaining grain boundary (GB) fracture properties and phase field mechanics for capturing polycrystalline deformation and failure. An authentic microstructure, reconstructed from experimental lattice diffraction data with locally refined discretization in GB regions, is used to probe effects of local heterogeneities on material response in phase field simulations. The nominal microstructure consists of larger diamond and SiC (cubic polytype) grains, a matrix of smaller diamond grains and nanocrystalline SiC, and GB layers encasing the larger grains. These layers may consist of nanocrystalline SiC, diamond, or graphite, where volume fractions of each phase are varied within physically reasonable limits in parametric studies. Distributions of fracture energies from MD tension simulations are used in the phase field energy functional for SiC-SiC and SiC-diamond interfaces, where grain boundary geometries are obtained from statistical analysis of lattice orientation data on the real microstructure. An elastic homogenization method is used to account for distributions of second-phase graphitic inclusions as well as initial voids too small to be resolved individually in the continuum field discretization. In phase field simulations, SiC single crystals may twin, and all phases may fracture. The results of MD calculations show mean strengths of diamond-SiC interfaces are much lower than those of SiC-SiC GBs. In phase field simulations, effects on peak aggregate stress and ductility from different GB fracture energy realizations with the same mean fracture energy and from different random microstructure orientations are modest. Results of phase field simulations show unconfined compressive strength is compromised by diamond-SiC GBs, graphitic layers, graphitic inclusions, and initial porosity. Explored ranges of porosity and graphite fraction are informed by physical observations and constrained by accuracy limits of elastic homogenization. Modest reductions in strength and energy absorption are witnessed for microstructures with 4% porosity or 4% graphite distributed uniformly among intergranular matrix regions. Further reductions are much more severe when porosity is increased to 8% relative to when graphite is increased to 8%.

The influence of microstructure on the mechanical properties of polycrystalline diamond: a literature review

Research Progress of Thermal Stability for Polycrystalline Diamond

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Enhancing the fracture toughness of polycrystalline diamond by adjusting the transgranular fracture and intergranular fracture modes

Advances in polycrystalline diamond (PCD) micro drills for efficient micro-hole machining in hard-brittle materials: a review of design, fabrication, and performance

An advanced investigation of polycrystalline diamond compact's degradation mechanism during granite turning

Friction and Wear Behavior of Polycrystalline Diamond at Temperatures Up to 700 °C

Experimental and Multiscale Numerical Investigation of Wear Mechanism and Cutting Performance of Polycrystalline Diamond Tools in Micro-End Milling of Titanium Alloy Ti-6Al-4V

Fracture Strength and Toughness of Chemical-Vapor-deposited Polycrystalline Diamond Films

Effect of ZrB$_2$ additions on the thermal stability of polycrystalline diamond

Role of the microstructure and the residual strains on the mechanical properties of cast tungsten carbide produced by different methods

Exploring Ductility in Dental Ceramics

Comparing the tribological behavior of polycrystalline diamonds against steel GCr15 and ceramic Si 3 N 4 : friction and wear

Effect of grain boundary on polycrystalline diamond polishing by high-speed dynamic friction

Effects of composite binder and sintering temperature on the microstructure, properties and reaction mechanism of polycrystalline diamond

Effect of diamond grain size on mechanical properties and cutting performance of PCD tool in milling of C f /SiC composites

A Multi-Scale Approach for Phase Field Modeling of Ultra-Hard Ceramic Composites

The Wear and Friction Characters of Polycrystalline Diamond under Wetting Conditions

Thermal softening-suppressed inter-granular embrittlement of polycrystalline 3C-SiC under diamond cutting

Atomistic origin of brittle-to-ductile transition behavior of polycrystalline 3C–SiC in diamond cutting

Friction and wear of polycrystalline diamond in oil drilling: a review