Abstract:High sensitivity to crack and damage of chemical vapor-deposited silicon carbide (CVD- SiC) restricts the high-efficiency and low-damage manufacturing of CVD-SiC components. This paper aims to reveal the damage and material removal mechanisms of CVD-SiC after being scratched by diamond abrasives. The mechanical properties, scratching force, depth of ductile-brittle transition, residual depth and material removal damages of the CVD-SiC were discussed by the indentation, nano-scratching experiments, and compared with sintered silicon carbide (SSiC) ceramics. The results demonstrated that the mechanical properties of CVD-SiC are better than SSiC. In terms of hardness and fracture toughness, CVD-SiC demonstrates a 10– 20% and 20– 30% higher level of performance than SSiC, respectively. SSiC exhibits a brittleness level approximately 30% higher than that of CVD-SiC. SSiC ceramics are prone to crack deflection, intergranular fracture and transgranular fracture during indentation, indicating a higher propensity for brittle fracture in SSiC. The crack propagation in CVD-SiC is relatively regular. Both materials undergo the ductile, ductile-brittle transition and brittle stage, and the fluctuation variability of CVD-SiC material is notably lower than that of SSiC during the brittle stage. Compared with SSiC, the residual depth, groove width and transverse force of CVD-SiC are smaller under the same normal load. The critical depth of ductile-brittle transition of CVD-SiC is about 2 times that of SSiC in experimental and theoretical, indicating that CVD-SiC easily achieves ductile grinding. The mechanical properties, crack system and crystal structure of the CVD-SiC and SSiC materials cause the divergences in brittle removal. The radial-median crack system dominates the material removal of CVD-SiC. The disparity of deformations on the inside and outside of the crystal in the brittle stage leads to significant fluctuation variability of force and depth of SSiC during the scratching.

Atomistic origin of brittle-to-ductile transition behavior of polycrystalline 3C–SiC in diamond cutting

Thermal softening-suppressed inter-granular embrittlement of polycrystalline 3C-SiC under diamond cutting

Atomistic investigation of machinability of monocrystalline 3C–SiC in elliptical vibration-assisted diamond cutting

Formation of high density stacking faults in polycrystalline 3C-SiC by vibration-assisted diamond cutting

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

Material removal mechanism of brittle-ductile transition in milling SiC ceramic and experimental verification

Molecular dynamics analysis of subsurface brittleness mechanism of nanocrystalline 3C-SiC rough friction surface

Atomic Simulations of Deformation Mechanism of 3C-SiC Polishing Process with a Rolling Abrasive

A Numerical Analysis of Ductile Deformation during Nanocutting of Silicon Carbide via Molecular Dynamics Simulation

Atomistic insights on the nanoscale single grain scratching mechanism of silicon carbide ceramic based on molecular dynamics simulation

On the deformation mechanism of SiC under nano-scratching: An experimental investigation

Molecular Dynamics Analysis Micro-Mechanism Of Ductile Machining Single Crystal Silicon By Means Of Nanometric Cutting Technology

Depth-sensing ductile and brittle deformation in 3C-SiC under Berkovich nanoindentation

Study on wear of diamond during scratching SiC using molecular dynamics simulations

Diamond machining of silicon: A review of advances in molecular dynamics simulation

Influence of Microstructures on Mechanical Behaviours of SiC Nanowires: a Molecular Dynamics Study

Influence of diamond abrasives on material removal of single crystal SiC in mechanical dicing

Damage characteristics and material removal mechanisms of CVD-SiC in nanotests: A comparative with sintered SiC

Atomic-Scale Characterization of Slip Deformation and Nanometric Machinability of Single-Crystal 6H-SiC

The interaction between grain boundary and tool geometry in nanocutting of a bi-crystal copper