Abstract:The adhesive strength and surface roughness of diamond films are the key factors to influence the cutting performance and tool life of diamond-coated tools. Compared with the sintered polycrystalline diamond, the deposited thin film diamond has the great advantage on the fabrication of cutting tools with complex geometries. Because of their low costs for fabrication equipment and high performance on high speed machining non-ferrous metals and alloys, metal-compound materials, and hard brittle non-metals, diamond-coated drills find great potentialities in the commercial application. However, the poor adhesion of the diamond film on the substrate becomes the main technical barriers for the successful development and commercialization of diamond-coated tools. In this paper, diamond thin films were deposited on WC-Co based drills by the electron aided hot filament chemical vapor deposition (EACVD). A new multiple chemical pretreatment technology including microwave oxidation, reaction in alkaline solution and cleaning by ultrasonic treatment in acid solution was developed and affects on the diamond adhesion strength, nucleation and surface morphology were investigated. At the same time, a special setup to fabricate diamond-coated drills was also developed and then the novel CV]D process based on the varied parameters controlling model was presented, therefore the uniform quality and homogenized thickness of diamond coating could be available. Composite diamond films were achieved by firstly depositing the rough polycrystalline diamond layers which had good adhesion, and then overlapping the smooth diamond layers with nanometer size grains which yielded very low roughness. From practical utilization viewpoint, the cutting performance of the diamond coated drill was studied by drilling SiC particle reinforced aluminum matrix composite. The satisfied wear resistance and decrease of torque and thrust lead to the long tool life of the diamond coated drills. This paper exhibits the meaningful work for the development of cutting tools with complex geometries and further extends application of diamond material.

Performance of diamonds as cutting tools for precision machining

Controllable Diamond Cutting of Structured Surfaces with Subnanometric Height Features on Silicon

Numerical simulation of materials-oriented ultra-precision diamond cutting: Review and outlook

Ultra-Precision Machining: Cutting With Diamond Tools

Diamond machining of silicon: A review of advances in molecular dynamics simulation

Cutting performance and wear mechanism of multilayer diamond coated tools

Novel surface characteristics observed during grinding of polycrystalline diamond

Graphitization Behavior of Single Crystal Diamond for the Application in Nano-Metric Cutting.

Precision Machining by Dicing Blades: A Systematic Review

Vibration-Assisted Precision Machining of Steel with Pcd Tools

The influence of microstructure on the mechanical properties of polycrystalline diamond: a literature review

Tool Wear in Ultra-Precision Diamond Cutting of Non-Ferrous Metals with a Round-Nose Tool

Fabricating diamond bit by selective laser melting and its drilling performance evaluation

Studies of Adhesion and Roughness of Diamond Coated Drills and Influence on Cutting Performance

Ultra-short pulsed laser processing of single crystalline diamonds for tooling applications

Precision Grinding of a Microstructured Surface on Hard and Brittle Materials by a Microstructured Coarse-Grained Diamond Grinding Wheel

A critical review on the chemical wear and wear suppression of diamond tools in diamond cutting of ferrous metals

Studies on the Performance of Diamond Thin Films with Different Tungsten Carbide Substrates

Experimental and Multiscale Numerical Investigation of Wear Mechanism and Cutting Performance of Polycrystalline Diamond Tools in Micro-End Milling of Titanium Alloy Ti-6Al-4V

Effects of processing parameters and grinding direction on the material removal mechanism of (100) surface single crystal diamond in self-rotating mechanical grinding