Abstract:Maintaining high surface area and porosity at high temperatures is important when considering aerogels for use in thermal management systems. The mesoporous structure of aerogels results in extremely low thermal conductivity, making them lightweight, high performance insulating materials. Maintaining these properties requires innovative routes to suppress sintering and pore collapse as use temperatures rise. The current work aims to improve the pore structure stability of yttria‐stabilized zirconia aerogels by the addition of a SiO2 coating. The functionalization of surface hydroxyl groups by the addition of SiO2 is hypothesized to mitigate condensation reactions, which are a driving force for shrinkage and pore structure collapse. Zirconia aerogels with 0, 10, and 30 mol% yttria (YO1.5) additions were coated in a tetraethyl orthosilicate (TEOS) solution and exposed to temperatures up to 1200°C. Crystal structure, pore structure, and aerogel morphology were investigated to understand changes in aerogel thermal stability. The SiO2 coating exhibited a greater influence on pore stability over yttria concentration, with specific surface area of the coated aerogels being twice that of the uncoated aerogels up to 1000°C. However, the presence of the SiO2 coating promoted rapid sintering and densification at 1200°C, establishing an upper use temperature for SiO2 and a need to develop other coating chemistries.

Synthesis of high-temperature resistant monolithic zirconia-based aerogel via facile water glass assisted sol–gel method

Synthesis of high temperature resistant ZrO2-SiO2 composite aerogels via “thiol-ene” click reaction

Highly thermally stable zirconia/silica composite aerogels prepared by supercritical deposition

One-step Synthesis of Monolithic Micro-Nano Yttria Stabilized ZrO2-Al2O3 Composite Aerogel

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Characterization of High-Surface-Area Zirconia Aerogel Synthesized from Combined Alcohothermal and Supercritical Fluid Drying Techniques

Preparation of La2Zr2O7 composite SiO2 aerogels and their fiber-reinforced materials for thermal insulation applications

Postsynthetic modification of yttria‐stabilized zirconia aerogels with silica coatings for enhanced thermal stability

Design and preparation of novel Y2O3-SiO2 composite aerogels for high-temperature thermal insulators

A Facile Method to Fabricate Al2O3-SiO2 Aerogels with Low Shrinkage up to 1200 °C

Synthesis and Characterization of Silica Aerogel and Its Composite Materials

A Simple Alcohothermal Synthetic Route to High Surface Area Zirconia Aerogel

A Novel Preparation Process for Thermally Stable Ultrafine Tetragonal Zirconia Aerogel

Novel Self-Reinforcing ZrO2–SiO2 Aerogels with High Mechanical Strength and Ultralow Thermal Conductivity

Facile preparation of ZrCO composite aerogel with high specific surface area and low thermal conductivity

Preparation of monolithic Al2O3–SiO2 aerogels with high-temperature resistance using boehmite nanorods

Preparation and Characterization of High Surface Area Zro2 Aerogel Modified by Sio2

Preparation and characterization of nano-porous silica-zirconia aerogels

Preparation and properties of low-density and high-temperature resistant yttrium doped silica aerogels

Novel Al 2 O 3 –sio 2 Aerogel/porous Zirconia Composite with Ultra-Low Thermal Conductivity

Synthesis of a novel Al 2 O 3 –SiO 2 composite aerogel with high specific surface area at elevated temperatures using inexpensive inorganic salt of aluminum