Abstract:In this paper, we propose a new method to analyze airport pavement bearing capacity using vibration in runways during aircraft taxiing. The new method overcomes shortcomings of existing tests, such as flight suspension and simulated loading. Between aircraft take-off and landing, acceleration sensors are arranged on the surface of the pavement far from the centerline, and the in-situ responses of the pavement under aircraft loads are collected during aircraft operations. The fundamental frequencies of the pavement are obtained by fast Fourier transformation of the measured accelerations, and are used to modify the parameters of a pavement finite element model built according to a design blueprint. By comparing the fundamental frequencies of the measured and calculated signals, the soil modulus is back-calculated. To implement this test method and ensure the accuracy of bearing capacity evaluation, aircraft dynamic loads are obtained by solving dynamic balance equations of the aircraft-pavement coupled system, and the vibration response of the pavement and sensitivity analysis of the fundamental frequencies are introduced. The results show that the fundamental frequencies at the center of the pavement are basically the same as those at the far side on the cross section; the fundamental frequencies in the depth direction remain constant, but the amplitude of the frequency spectrum decreases. The effect of the soil resilient modulus on the vibration frequency is most significant. The fundamental frequency increases from 6.02 to 10.55 Hz when the soil dynamic resilient modulus changes from 91 to 303 MPa. The effects of surface thickness and base thickness on the vibration frequency are less significant, and there is minimal influence when changing the dynamic elastic moduli of the surface layer or base layer. Field test results indicate the efficacy of the method of vibration measurement at the pavement surface to estimate the layer modulus of airport pavement.

Dynamic response analyses of snow-melting airport rigid pavement under different types of moving loads

Dynamic response of rigid pavements to moving vehicles

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Development of Equivalent Stationary Dynamic Loads for Moving Vehicular Loads Using Artificial Intelligence-Based Finite Element Model Updating

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

Dynamic response analysis of airport pavements during aircraft taxiing for evaluating pavement bearing capacity

Dynamic Response of Viscoelastic Asphalt Pavement under Non-uniform Moving Load

Dynamic response analysis of inhomogeneous subgrade subjected to moving aircraft loads

Mechanical Response of Asphalt Surfaces under Moving Traffic Loads Using 3D Discrete Element Method

Responses of Snow-Melting Airfield Rigid Pavement under Aircraft Loads and Temperature Loads and Their Coupling Effects

Dynamic Response of Pavements on Poroelastic Half-Space Soil Medium to a Moving Traffic Load

Finite-Element Simulation of Instrumented Asphalt Pavement Response under Moving Vehicular Load

Dynamic Response of Reinforced Pavements System Subjected to Moving Loads

Dynamic response analysis of asphalt pavement under three-directional nonuniform moving load

Dynamic Response of Pavement Subjected to Moving Traffic Load

Dynamic response of the inhomogeneous pavement structure containing a buried fault zone under the moving aircraft loads

Analysis of Dynamic Stress Path in Inhomogenous Subgrade under Moving Aircraft Load

Field evaluation and statistical analysis of the dynamic response of semi-rigid pavement under full-scale moving truck load

Effects of Random Non-uniform Load on Asphalt Pavement Dynamic Response

The Research on Dynamic Back-analysis of Parameters of Airport Rigid Pavement Properties

Research on Airport Rigid Pavement Modal Parameter Identification Based on Dynamic Loading