Abstract:In this paper, we propose a new method to analyze airport pavement bearing capacity using vibration in runways during aircraft taxiing. The new method overcomes shortcomings of existing tests, such as flight suspension and simulated loading. Between aircraft take-off and landing, acceleration sensors are arranged on the surface of the pavement far from the centerline, and the in-situ responses of the pavement under aircraft loads are collected during aircraft operations. The fundamental frequencies of the pavement are obtained by fast Fourier transformation of the measured accelerations, and are used to modify the parameters of a pavement finite element model built according to a design blueprint. By comparing the fundamental frequencies of the measured and calculated signals, the soil modulus is back-calculated. To implement this test method and ensure the accuracy of bearing capacity evaluation, aircraft dynamic loads are obtained by solving dynamic balance equations of the aircraft-pavement coupled system, and the vibration response of the pavement and sensitivity analysis of the fundamental frequencies are introduced. The results show that the fundamental frequencies at the center of the pavement are basically the same as those at the far side on the cross section; the fundamental frequencies in the depth direction remain constant, but the amplitude of the frequency spectrum decreases. The effect of the soil resilient modulus on the vibration frequency is most significant. The fundamental frequency increases from 6.02 to 10.55 Hz when the soil dynamic resilient modulus changes from 91 to 303 MPa. The effects of surface thickness and base thickness on the vibration frequency are less significant, and there is minimal influence when changing the dynamic elastic moduli of the surface layer or base layer. Field test results indicate the efficacy of the method of vibration measurement at the pavement surface to estimate the layer modulus of airport pavement.

Dynamic response analysis of inhomogeneous subgrade subjected to moving aircraft loads

Analysis of Dynamic Stress Path in Inhomogenous Subgrade under Moving Aircraft Load

Dynamic Response of Saturated Subgrade with Rock Substratum Subjected to Moving Loads

Dynamic response of subgrade under moving loads of main landing gears

Steady State Response of Infinite Plate on Visco-elastic Foundation Subjected to Moving Load

A Double-Layered Model for Highway Subgrade and Its Dynamic Response Due to Traffic Loads

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Dynamic Response of Reinforced Unpaved Subgrade Subjected to Moving Loads

Dynamic response of an elastic half-space underlying an infinite Euler-beam to moving load

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Dynamic Response of Reinforced Pavements System Subjected to Moving Loads

Dynamic Response of Pavement Subjected to Moving Traffic Load

Numerical Analysis on Deformation of Pavement and Soft Clay Ground Interaction for Cyclic Loads

Dynamic response of a multi-layered pavement structure with subgrade modulus varying with depth subjected to a moving load

Dynamic response analyses of snow-melting airport rigid pavement under different types of moving loads

Dynamic Response of Viscoelastic Asphalt Pavement under Non-uniform Moving Load

DYNAMIC RESPONSE ANALYSIS OF TRACK SYSTEM AND UNDERGROUND RAILWAY TUNNEL IN SATURATED SOIL SUBJECTED TO A MOVING TRAIN LOAD

Dynamic Analysis of a Slab Track on the Poroelastic Soil Subjected to Moving Loads

Experimental and numerical prediction of airport pavement over expansive subgrade stabilized by asphalt layers

Dynamic response analysis of airport pavements during aircraft taxiing for evaluating pavement bearing capacity

Structural Analysis of Backfill Highway Subgrade on the Lower Bearing Capacity Foundation Using the Finite Element Method