Abstract:Permanent deformation is a long-term irrecoverable depression accumulated in the wheel path when the flexible pavement is subjected to heavy loads at high temperature, which can be simulated using the vertically loaded wheel test (VLWT) in the laboratory. The objective of this study is to develop a new approach to analyze the vertically loaded wheel test results based on the elastic-viscoelastic correspondence principle. The energy-based pseudo variables are proposed to perform rutting evaluation of asphalt mixtures in the VLWT.Four types of styrene-butadienestyrene modified asphalt mixtures were prepared to conduct the undamaged compressive dynamic modulus test at different temperatures. Then the master curves of dynamic modulus for these mixtures were converted to get the relaxation modulus. The innovative VLWT for four types of two-layer structure with different asphalt mixture combinations were performed to investigate the rutting development. After that, a new mechanical-empirical rutting prediction model was introduced to predict the rutting development for each layer in the two-layer structure. The energy-based pseudo variables including pseudo strain, pseudo strain rate and dissipated pseudo strain energy (DPSE) were introduced to correlate with the rutting resistance.The results show that the developed mechanical-empirical rutting prediction model is proficient in capturing the rutting development of a two-layer structure of asphalt mixtures measured by a vertically loaded wheel tester. The rutting contributions of the top and bottom layers can be separated using this model. Compared with the total strain, the pseudo strain which removes the viscoelastic effect, is more accurate to evaluate the permanent deformation in a cyclic loading condition. The DPSE increases with the increase of loading cycles and rut depth. Two typical stages with an inflection point can be observed from the test results which indicate that the faster to reach the inflection point, the better rutting performance will be achieved.

The Research on Dynamic Back-analysis of Parameters of Airport Rigid Pavement Properties

Dynamic response of rigid pavements to moving vehicles

Steady State Response of Infinite Plate on Visco-elastic Foundation Subjected to Moving Load

Research on Airport Rigid Pavement Modal Parameter Identification Based on Dynamic Loading

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Elastoplastic Analysis of Asphalt Concrete Pavement

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Mechanical Analysis of the Effect of Overloading on Pavement Performance

A Novel Approach for the Mechanical Response of Cement Concrete Pavement Structure Considering the Interlaminar Interface Shear Slip Effect

Dynamic Analysis of Rectangular Plates on Two-parameter Viscoelastic Foundation under Impact Load

Evaluation of Rutting Potential of Flexible Pavement Structures Using Energy-Based Pseudo Variables

Development of a Modulus of Subgrade Reaction Model to Improve Slab-Base Interface Bond Sensitivity

A Dynamic Identification Approach to Foundational Response Modulus for Airport Pavement

Dynamic Response of Pavement Subjected to Moving Traffic Load

Numerical Analysis on Deformation of Pavement and Soft Clay Ground Interaction for Cyclic Loads

Dynamic response analysis of inhomogeneous subgrade subjected to moving aircraft loads

Dynamic response analysis of airport pavements during aircraft taxiing for evaluating pavement bearing capacity

Dynamic Response of Reinforced Pavements System Subjected to Moving Loads

Dynamic response analyses of snow-melting airport rigid pavement under different types of moving loads

Viscoelastic Analysis of Asphalt Pavement with Reflective Cracks and Subjected to Dynamic Loading

Dynamic Response of Pavements on Poroelastic Half-Space Soil Medium to a Moving Traffic Load