Abstract:In this paper, we propose a new method to analyze airport pavement bearing capacity using vibration in runways during aircraft taxiing. The new method overcomes shortcomings of existing tests, such as flight suspension and simulated loading. Between aircraft take-off and landing, acceleration sensors are arranged on the surface of the pavement far from the centerline, and the in-situ responses of the pavement under aircraft loads are collected during aircraft operations. The fundamental frequencies of the pavement are obtained by fast Fourier transformation of the measured accelerations, and are used to modify the parameters of a pavement finite element model built according to a design blueprint. By comparing the fundamental frequencies of the measured and calculated signals, the soil modulus is back-calculated. To implement this test method and ensure the accuracy of bearing capacity evaluation, aircraft dynamic loads are obtained by solving dynamic balance equations of the aircraft-pavement coupled system, and the vibration response of the pavement and sensitivity analysis of the fundamental frequencies are introduced. The results show that the fundamental frequencies at the center of the pavement are basically the same as those at the far side on the cross section; the fundamental frequencies in the depth direction remain constant, but the amplitude of the frequency spectrum decreases. The effect of the soil resilient modulus on the vibration frequency is most significant. The fundamental frequency increases from 6.02 to 10.55 Hz when the soil dynamic resilient modulus changes from 91 to 303 MPa. The effects of surface thickness and base thickness on the vibration frequency are less significant, and there is minimal influence when changing the dynamic elastic moduli of the surface layer or base layer. Field test results indicate the efficacy of the method of vibration measurement at the pavement surface to estimate the layer modulus of airport pavement.

A Dynamic Identification Approach to Foundational Response Modulus for Airport Pavement

Dynamic response of rigid pavements to moving vehicles

Steady State Response of Infinite Plate on Visco-elastic Foundation Subjected to Moving Load

Steady-state response of the plate on Kelvin foundation under moving loads

Research on Airport Rigid Pavement Modal Parameter Identification Based on Dynamic Loading

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

The Research on Dynamic Back-analysis of Parameters of Airport Rigid Pavement Properties

A Novel Approach for the Mechanical Response of Cement Concrete Pavement Structure Considering the Interlaminar Interface Shear Slip Effect

Dynamic response analysis of airport pavements during aircraft taxiing for evaluating pavement bearing capacity

Elastoplastic Analysis of Asphalt Concrete Pavement

Mechanical Analysis of the Effect of Overloading on Pavement Performance

Dynamic Response of Pavement Subjected to Moving Traffic Load

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Development of a Modulus of Subgrade Reaction Model to Improve Slab-Base Interface Bond Sensitivity

A New Dynamic Modulus Predictive Model for Asphalt Mixtures Based on the Law of Mixtures

Determination of Complex Modulus Gradients of Flexible Pavements Using Falling Weight Deflectometer and Artificial Intelligence

Dynamic Analysis of Rectangular Plates on Two-parameter Viscoelastic Foundation under Impact Load

Development of Equivalent Stationary Dynamic Loads for Moving Vehicular Loads Using Artificial Intelligence-Based Finite Element Model Updating

Dynamic Response of Pavements on Poroelastic Half-Space Soil Medium to a Moving Traffic Load

Dynamic Response of Reinforced Pavements System Subjected to Moving Loads

Dynamic response analyses of snow-melting airport rigid pavement under different types of moving loads