Abstract:Crofer 22 APU is ferritic stainless steel extensively used as metallic interconnect material in Solid Oxide Fuel Cell (SOFC) applications. The interconnects are exposed to both oxidizing and reducing atmospheres at high temperatures. As SOFCs are operated above 700 °C, understanding the thermal expansion behavior of the interconnect material with other components (anode, cathode, electrolyte) of the fuel cells is essential. Metallic interconnects should have a matchable thermal expansion to other ceramic materials such as anode, cathode, and solid electrolyte used in SOFCs. The present study evaluates the thermal expansion of Crofer 22 APU steel from 25 to 950 °C in a controlled atmosphere (10-4 mbar pressure) using in-situ high-temperature X-ray diffraction (XRD). The XRD patterns were analyzed using the ‘High Score Plus Software’ attached to the system, and the phases were identified using the standard Crystallographic Open Database (COD). The coefficient of thermal expansion (CTE) was determined based on the change in lattice parameter/peak shift to a lower 2θ value as a function of temperature. The normal XRD data showed no oxide formation on the Crofer steel after heating until 950 °C in in-situ high-temperature conditions. The peak shift to the lower 2θ degree observed in the XRD data was due to the relaxation of residual stress upon heating. The isothermal section and phase fraction of Crofer 22 APU alloys are analyzed with the help of thermo-calc with the iron database of TCFE7. The Fe-rich bcc phase was found to be stable up to high temperatures. The major phases are the Fe-rich bcc, Cr-rich BCC, and sigma phase in the solid state. The minor phases are FCC, M3P, TiC, Laves, and Ti4C2S2. The calculated lattice parameter of the Fe-rich BCC phase matches with the experimentally calculated data using XRD. The thermal expansion of Crofer 22 APU was found to be 11.9181 × 10-6 /°C at 950 °C. The in-situ high-temperature XRD technique has been an effective methodology for determining the thermal expansion behavior of the as-received Crofer steel.

Oxidation, electrical and mechanical properties of Crofer ® 22 solid oxide fuel cell metallic interconnects manufactured through powder metallurgy

Metallic Interconnects for Solid Oxide Fuel Cell: Performance of Reactive Element Oxide Coating During 10, 20 and 30 Months Exposure

Influence of Cr Content on the Mechanical, Oxidation, and Electrical Properties of Powder Metallurgy Ferritic Stainless Steel for Solid Oxide Fuel Cell Interconnect

Metallic interconnects for solid oxide fuel cell: Performance of reactive element oxide coating during long time exposure

Properties of Fe–Cr Based Alloys As Interconnects in a Solid Oxide Fuel Cell

Mechanical characterization of oxide coating–interconnect interfaces for solid oxide fuel cells

Comparative study on oxidation behavior and electrical conductivity of Crofer22 and STS444 alloys

Applying the Protective Mn–Co–La2O3 Coating on Crofer 22 APU Ferritic Stainless Steel Used as Solid Oxide Fuel Cell Interconnects

The effect of surface treatment on the oxidation of ferritic stainless steels used for solid oxide fuel cell interconnects

Ni–Co/ZrO2 Composite Coatings via Electroless Plating on Crofer 22APU for SOFC Interconnect Applications: Oxidation and Chromium Vaporization Behavior

Characterization of Metallic Interconnects Extracted from Solid Oxide Fuel Cell Stacks Operated up to 20,000 h in Real Life Conditions: The Air Side

Metallic Interconnect Materials Used in Solid Oxide Fuel Cell

Ferritic Steel Interconnect Used in Solid Oxide Fuel Cell

Mechanical reliability and life prediction of coated metallic interconnects within solid oxide fuel cells

Test and Modelling of Solid Oxide Fuel Cell Durability: A Focus on Interconnect Role on Global Degradation

Change in the Microstructure of Ferritic Stainless Steel with Surface Roughness and the Number of Thermal Cycles

Metallic Co with Reactive Element Oxide Composite Coatings for Solid Oxide Fuel Cell Interconnect Applications

Fabricating a MnCo coating to improve oxidation resistance and electrical conductivity of Crofer22H alloy as SOFC interconnect

Thermal expansion of Crofer 22 APU steel used for SOFC interconnect using in-situ high temperature X-ray diffraction

Perspectives on the metallic interconnects for solid oxide fuel cells

Life prediction of coated and uncoated metallic interconnect for solid oxide fuel cell applications