Abstract:Recently, high-temperature composites reinforced with in-situ phases have been developed as a new class of composites for harsh environments. The behaviour of these composites under sudden heating and cooling conditions is greatly influenced by the type and fraction of components. The aim of this study is to investigate the microstructural properties and mechanical response of iron based composites after thermal shock cycling. The fabrication process involved in-situ powder metallurgy (IPM) sintering of Fe–B4C starting powders. The samples were subjected to thermal shock with a constant temperature differences (ΔT: 600 °C) and varied cycles (N: 1–50). Comparison of microstructural changes and mechanical behaviour before and after thermal shock has been carried out. The boron atoms released from the initial B4C generated diffusion zones in the matrix dominated by iron boride phases (Fe2B/FeB). An effective matrix-reinforcement interface has been created by in-situ powder metallurgy, where boride phases are almost homogeneously distributed in the iron matrix. While the hardness of the composites was significantly developed by the Fe2B/FeB phases, the addition of B4C resulted in a reduction in the coefficient of thermal expansion (CTE). The in-situ phases contributed in the minimisation of the coefficient mismatch by balancing the thermal expansion coefficients between iron and the initial B4C. Under the influence of thermal shock, microcracks and then macrocracks formed on the sample surfaces, increasing in width and depth with thermal cycles. This resulted in accelerated fracture damage under post-thermal loading. Both the impact and flexural strengths of the samples were significantly reduced as the number of thermal cycles increased. Although the 20% B4C reinforced composite provided maximum hardness, it showed poor resistance to thermal loading. The best results for mechanical loads were achieved by the 5% B4C reinforced composite, which showed no cracks even after 50 thermal cycling.

Microstructure and High Temperature Oxidation Property of Fe–Cr–B Based Metal/Ceramic Composite Manufactured by Powder Injection Molding Process

Microstructure and High Temperature Mechanical Property of Fe–Cr–B Based Metal/Ceramic Composite Manufactured by Metal Injection Molding Process

High temperature oxidation behavior of plasma sprayed chromium boride-chromium carbide composite coatings

Effect of Fe-Cr-B on the Microstructure and Mechanical Properties of a Powder Injection Molding Processed Fe-Cr-B/316L Stainless Steel Matrix Composite

High temperature flexural strength, microstructure, phase evolution and anti-oxidation mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composite modified with TiB2 and B4C

Microstructure Evolution and Oxidation Resistance Properties of Oxide Dispersion Strengthened FeCrAl Alloys at 1100 °C

Preparation and Properties of ZrO2-5CrMnMo Composites by Ceramic Injection Molding

Thermal shock effects on the microstructure and mechanical properties of iron-based composites reinforced by in-situ Fe2B/FeB ceramic phases

Thermal-mechanical driven oxidation of NiCr-Cr3C2-BaF2/CaF2 composite coating at high temperature

Element diffusion behaviors at high temperature and their effects on microstructure and tribological properties of Cr2O3 films

Exploring the Influence of Nanocrystalline Structure and Aluminum Content on High-Temperature Oxidation Behavior of Fe-Cr-Al Alloys

Microstructure and mechanical properties of a three‐dimensional oxide/oxide composite after long‐term thermal exposure

Effects of in situ composite ceramics on the mechanical properties and microstructure of Fe–Cr–Ni alloys

Microstructural Regulation, Oxidation Resistance and Mechanical Properties of Cf/SiC/SiHfBOC Composites Prepared by Chemical Vapor Infiltration with Precursor Infiltration Pyrolysis

High-Temperature Oxidation Properties and Microstructural Evolution of Nanostructure Fe-Cr-Al ODS Alloys

Influences of the pre-oxidation time on the microstructure and flexural strength of monolithic B4C ceramic and TiB2-SiC/B4C composite ceramic

Preparation, Mechanical Properties and Cyclic Oxidation Behavior of the Nanostructured NiCrCoAlY-TiB2 Coating

Mechanical properties and microstructure evolution of KD‐SA SiCf/BN/SiC CMCs oxidized at different temperatures

Properties of a Reaction-Bonded Β-Sialon Ceramic Doped with an FeMo Alloy for Application to Molten Aluminum Environments

Studies on As-Cast Microstructure and Oxidation Behavior of the FeCrBAl Alloys at 1073 K

Microstructural and micromechanical characterization of intergranular oxidation in Fe-15Cr alloy