Abstract:The Poly-Si/SiO x stack passivation structure incorporate doped polycrystalline silicon (Poly-Si) and tunneling silicon oxide (SiO x ) thin films allows for majority-carrier transport as well as block minority carriers and suppress recombination, and thus enable very high efficiency. Up to now the Poly-Si/SiO x stack passivation have been a widespread research topic for photovoltaic researchers, but most of the works are only focused on n-type doped structures and the rear side polished surface of the solar cells. In order to apply the Poly-Si/SiO x stack structure to the front textured surface and p + emitter region to obtain high-efficiency double-sided passivated contact solar cells and Si-based tandem cells in the future. In this work, passivation properties of Poly-Si/SiO x stack capped with SiN x :H layer are discussed based on different crystalline silicon surface morphologies, dopant types, doping profiles and thickness of Poly-Si layer. With proper doping process control, an excellent implied open-circuit voltage ( iVoc ) of 706 mV with a saturation current density ( J 0 ) value of 12 f A/cm 2 has been obtained for the boron-doped Poly-Si/SiO x stack capped with SiN x :H based on the textured surface, and an iVoc of 736 mV with a J 0 value of 2 f A/cm 2 has been acquired for the phosphorus-doped Poly-Si/SiO x stack capped with SiN x :H based on the acid polished surface. The results show that the polished surface and thinner Poly-Si layer are helpful for passivation. For the doped Poly-Si/SiO x stack structure, the doping source will penetrate the tunneling SiO x layer into the silicon bulk to form a certain penetration depth on the surface of the silicon substrate. In order to acquire the high iVoc (low J 0 ) value, a penetration depth of around 160 nm is needed to the phosphorus-doped Poly-Si/SiO x stack, while a penetration depth of less than 25 nm is required for boron-doped Poly-Si/SiO x stack. In addition, there is a linear relationship between the R sheet value and the reciprocal value of the Poly-Si (n + ) layer thickness.

Poly-crystalline silicon-oxide films as carrier-selective passivating contacts for c-Si solar cells

High-efficiency black IBC c-Si solar cells with poly-Si as carrier-selective passivating contacts

Highly transparent oxygen‐doped poly‐Si with in‐situ N2O oxidant for poly‐Si passivating contacts in perovskite/silicon tandem solar cells

A silicon oxide-based highly transparent passivating contact for crystalline silicon solar cells approaching efficiencies of 23%

Blistering-free polycrystalline silicon carbide films for double-sided passivating contact solar cells

The Passivation Characteristics of Poly-Si/SiOx Stack for High-Efficiency Silicon Solar Cells

Role of polysilicon in poly-Si/SiOx passivating contacts for high-efficiency silicon solar cells

Design and Optimization of SiOx/AZO Transparent Passivating Contacts for High‐Efficiency Crystalline Silicon Solar Cells

SiOx/polysilicon selective emitter prepared by PECVD-deposited amorphous silicon plus one-step firing enabling excellent J0,met of < 235 fA/cm2 and ρc of < 2 mΩ·cm2

Application of carrier-selective contacts in c-Si front/back contacted (FBC) and IBC solar cells with different thermal budget

Solution-Doped Polysilicon Passivating Contacts for Silicon Solar Cells

Phosphorus-diffused polysilicon contacts for solar cells

Interfacial Engineering of Cu 2 O Passivating Contact for Efficient Crystalline Silicon Solar Cells with an Al 2 O 3 Passivation Layer

Application of SiO2 Passivation Technique in Mass Production of Silicon Solar Cells

Comparison of different types of interfacial oxides on hole-selective p+-poly-Si passivated contacts for high-efficiency c-Si solar cells

Self‐Diffusion Effect Assisted TiO2/Li3PO4 Electron Selective Passivating Contact in Silicon Solar Cells Approaching 23% Efficiency

Crystalline silicon solar cells with thin poly‐SiOx carrier‐selective passivating contacts for perovskite/c‐Si tandem applications

Impurity Gettering by Boron‐ and Phosphorus‐Doped Polysilicon Passivating Contacts for High‐Efficiency Multicrystalline Silicon Solar Cells

Polysilicon Passivating Contacts for Silicon Solar Cells: Interface Passivation and Carrier Transport Mechanism

Novel Passivation and Gettering Strategy for Silicon Wafer by Al2O3/n‐poly‐Si/SiOx Stack for High‐Efficiency p‐Type Passivating Tunnel Oxide Contact Solar Cells

Improved V 2 O X Passivating Contact for p ‐Type Crystalline Silicon Solar Cells by Oxygen Vacancy Modulation with a SiO X Tunnel Layer