Abstract:The poly-Si carrier-selective passivating contacts (CSPCs) parasitically absorb a substantial amount of light, especially in the form of free carrier absorption. To minimize these losses, we developed CSPCs based on oxygen-alloyed poly-Si (poly-SiOx) and deployed them in c-Si solar cells. Transmission electron microscopy analysis indicates the presence of nanometer-scale silicon crystals within such poly-SiOx layers. By varying the O content during material deposition, we can manipulate the crystallinity of the poly-SiOx material and its absorption coefficient. Also, depending on the O content, the bandgap of the poly-SiOx material can be widened, making it transparent for longer wavelength light. Thus, we optimized the O alloying, doping, annealing, and hydrogenation conditions. As a result, an extremely high passivation quality for both n-type poly-SiOx (J0 = 3.0 fA/cm2 and iVoc = 740 mV) and p-type poly-SiOx (J0 = 17.0 fA/cm2 and iVoc = 700 mV) is obtained. A fill factor of 83.5% is measured in front/back-contacted solar cells with both polarities made up of poly-SiOx. This indicates that the carrier transport through the junction between poly-SiOx and c-Si is sufficiently efficient. To demonstrate the merit of poly-SiOx layers' high transparency at long wavelengths, they are deployed at the back side of interdigitated back-contacted (IBC) solar cells. A preliminary cell efficiency of 19.7% is obtained with much room for further improvement. Compared to an IBC solar cell with poly-Si CSPCs, a higher internal quantum efficiency at long wavelengths is observed for the IBC solar cell with poly-SiOx CSPCs, thus demonstrating the potential of poly-SiOx in enabling higher JSC.

Phosphorus-diffused polysilicon contacts for solar cells

Solution-Doped Polysilicon Passivating Contacts for Silicon Solar Cells

Phosphorus-doped polycrystalline silicon passivating contacts via spin-on doping

Poly-Si passivating contacts prepared via phosphorus spin-on-doping: A comparison between different silicon deposition methods

Optimizing Phosphorus-Doped Polysilicon in TOPCon Structures Using Silicon Oxide Layers to Improve Silicon Solar Cell Performance

Application of Phosphorus‐Doped Polysilicon‐Based Full‐Area Passivating Contact on the Front Textured Surface of P‐type Silicon

Influence of PECVD deposition temperature on phosphorus doped poly-silicon passivating contacts

Boron-Doped PECVD Silicon Oxides as Diffusion Sources for Simplified High-Efficiency Solar Cell Fabrication

Role of polysilicon in poly-Si/SiOx passivating contacts for high-efficiency silicon solar cells

SiOx/polysilicon selective emitter prepared by PECVD-deposited amorphous silicon plus one-step firing enabling excellent J0,met of < 235 fA/cm2 and ρc of < 2 mΩ·cm2

Efficiency Improvement of Industrial Silicon Solar Cells by the POCl3 Diffusion Process

A silicon oxide-based highly transparent passivating contact for crystalline silicon solar cells approaching efficiencies of 23%

Poly-crystalline silicon-oxide films as carrier-selective passivating contacts for c-Si solar cells

Current status and challenges for hole-selective poly-silicon based passivating contacts

Optimization of activated phosphorus concentration in recrystallized polysilicon layers for the n-TOPCon solar cell application

Polysilicon Passivating Contacts for Silicon Solar Cells: Interface Passivation and Carrier Transport Mechanism

A Novel Processing Technology for High‐Efficiency Silicon Solar Cells

Impurity Gettering by Boron‐ and Phosphorus‐Doped Polysilicon Passivating Contacts for High‐Efficiency Multicrystalline Silicon Solar Cells

Screen-printed n-type industry solar cells with tunnel oxide passivated contact doped by phosphorus diffusion

Blistering-free carbon-doped polysilicon (n+) passivating contact with high surface passivation properties prepared by industrial tube PECVD

Enhancing the Selectivity and Transparency of the Electron Contact in Silicon Heterojunction Solar Cells by Phosphorus Catalytic Doping