Abstract:The immobilization of glucose oxidase (GOD) via its dip-dry coating on a Prussian blue (PB) modified Au electrode followed by deposition of an outer poly(o-phenylenediamine) (PoPD) film and then glutaraldehyde (GA) cross-linking was investigated for amperometric glucose sensing, based on the reduction of enzymatically generated H2O2 catalyzed by the electroactive PB layer of the PoPD/GOD-GA/PB/Au electrode. The quartz crystal microbalance (QCM) was used to monitor various electrode-modification processes, and the effective enzymatic specific activity (ESA, defined as enzymatic activity per gram of enzyme) of immobilized GOD was estimated based on the mass of immobilized GOD (from QCM) and the quantity of hydrogen peroxide as the product of the enzymatic reaction (from amperometric detection) for the first time. The ESA of native GOD under our experimental conditions was also estimated via amperometric detection of enzymatically generated H2O2 at a PB-modified Au electrode. Effects of various experimental parameters on glucose sensing, including the applied potential, solution pH and electroactive interferents, were investigated. At an optimal potential of −0.05V versus saturated KCl calomel electrode (SCE), the current response of the biosensor in the selected phosphate buffer (pH 7.0) was linear with glucose concentration from 0.05 to 10mmolL−1, with detection limit of 8μmolL−1, short response time (within ∼5s) and good anti-interferent ability. The Michaelis constant (Kmapp) of the immobilized GOD was estimated as 19.6mmolL−1. The biosensor exhibited good storage stability, i.e., 88% of its initial response was retained after 30-day storage in pH 7.0 phosphate buffer at 4°C. Since the present sensor-fabrication platform is rather general and advantageous in saving biochemical reagents, it is recommended for the development of other biosensors based on other substrate electrode materials, e.g. glassy carbon that has been tested in this work with satisfactory results.

Development of an Amperometric Glucose Biosensor Based on the Immobilization of Glucose Oxidase on the Se-MCM-41 Mesoporous Composite

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

Development of amperometric glucose biosensor through immobilizing enzyme in a Pt nanoparticles/mesoporous carbon matrix.

An Amperometric Glucose Biosensor Constructed by Immobilizing Glucose Oxidase on Titanium-Containing Mesoporous Composite Material of No. 41 Modified Screen-Printed Electrodes.

Development Of Amperometric Biosensor For Glucose Based On A Novel Attractive Enzyme Immobilization Matrix: Calcium Carbonate Nanoparticles

Gold Nanoparticles-Mesoporous Silica Composite Used As an Enzyme Immobilization Matrix for Amperometric Glucose Biosensor Construction

Development of an amperometric glucose biosensor based on the immobilization of glucose oxidase in an ormosil-PVA matrix onto a Prussian Blue modified electrode

An Amperometric Glucose Biosensor Based on Glucose Oxidase Immobilized in Electropolymerized Poly(o-aminophenol) and Carbon Nanotubes Composite Film on a Gold Electrode

New Glucose Biosensor Based on a Poly(o-Phenylendiamine)/glucose Oxidase-Glutaraldehyde/prussian Blue/au Electrode with QCM Monitoring of Various Electrode-Surface Modifications

Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Carbon Nanotubes and Immobilizing Enzyme with Chitosan-Sio2 Sol-Gel

An electrochemical sensor based on copper oxide nanoparticles loaded on a mesoporous MCM-41 for non-enzymatic detection of glucose

An Amperometric Biosensor Based on Glucose Oxidase Immobilized in A Sol-Gel Polyvinyl Alcohol/Silica Hybrid Composite Film on A Prussian Blue Modified Electrode

Bienzymatic glucose biosensor based on direct electrochemistry of cytochrome c on gold nanoparticles/polyaniline nanospheres composite.

A Glucose Electrochemical Sensor Based on Glucose Oxidase Immobilized in Aminopropyl-Magnesium Phyllosilicate Nanosheets Matrix

Highly Sensitive Voltammetric Glucose Biosensor Based on Glucose Oxidase Encapsulated in a Chitosan/Kappa-Carrageenan/Gold Nanoparticle Bionanocomposite

A Biocompatible, Highly Sensitive, and Non-Enzymatic Glucose Electrochemical Sensor Based on a Copper-Cysteamine (Cu-Cy)/Chitosan-Modified Electrode

Glucose biosensor based on glucose oxidase immobilized in sol–gel chitosan/silica hybrid composite film on Prussian blue modified glass carbon electrode

Glucose Biosensor Based on Immobilization of Glucose Oxidase in Electrochemically Polymerized Polytyramine Film and Overoxidised Polypyrrole Film on Platinized Carbon Paste Electrode

Bienzymatic glucose biosensor based on co-immobilization of glucose oxidase and horseradish peroxidase on gold nanoparticles-mesoporous silica matrix

Development of a High Analytical Performance Amperometric Glucose Biosensor Based on Glucose Oxidase Immobilized in a Composite Matrix: Layered Double Hydroxides/chitosan

An reagentless glucose biosensor based on direct electrochemistry of glucose oxidase immobilized on poly(methylene blue) doped silica nanocomposites