Abstract:Polydopamine (Pdop) has recently been shown to adsorb to a wide variety of surfaces and serves as an adhesion layer to immobilize biological molecules. In this work, the multifunctional carbon nanotube (CNT) composites were prepared though the oxidation of dopamine at room temperature and subsequent electroless silver deposition by mildly stirring. The stable immobilization and direct electron transfer of glucose oxidase were achieved on the composite film modified glassy carbon electrode. The resulting electrode gave a well-defined redox peaks with a formal potential of about −482mV (vs. SCE) in pH 7.0 buffer. The electron transfer rate constant was estimated to be 3.6s−1, due to the combined contribution of Pdop, CNTs and Ag nanoparticles with the help of Nafion. Furthermore, the method for detecting of glucose was proposed based on the decrease of oxygen caused by the enzyme-catalyzed reaction between glucose oxidase (GOD) and glucose. The linear response to glucose ranging from 50.0μM to 1.1mM (R2=0.9958), with a calculated detection limit of 17.0μM at a signal-to-noise ratio of 3. The low calculated apparent Michaelis–Menten constant (KMapp) was 5.46mM, implying the high enzymatic activity and affinity of immobilized GOD for glucose. It can reasonably be expected that this observation might hold true for other noble metal nanostructure-electroactive protein systems, providing a promising platform for the development of biosensors and biofuel cells.

A Pyrrole Quinoline Quinone Glucose Dehydrogenase Biosensor Based on Screen-Printed Carbon Paste Electrodes Modified by Carbon Nanotubes

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

A glucose biosensor based on partially unzipped carbon nanotubes.

Electrochemical biosensing platforms using poly-cyclodextrin and carbon nanotube composite.

Glucose biosensor based on multi-wall carbon nanotubes and screen printed carbon electrodes.

Study of glucose and Uric Acid Biosensors Based on Screen-Printed Carbon Paste Electrodes Modified by Carbon Nanotubes

Amperometric Biosensor Based on Carbon Nanotubes Coated with Polyaniline/ Dendrimer-Encapsulated Pt Nanoparticles for Glucose Detection

A Glucose Biosensor Based on Electrocatalytic Oxidation of NADPH at Single-Walled Carbon Nanotubes Functionalized with Poly(nile Blue A)

A glucose biosensor based on electrodeposition of palladium nanoparticles and glucose oxidase onto Nafion-solubilized carbon nanotube electrode

Direct Electrochemistry of Glucose Oxidase and Electrochemical Biosensing of Glucose on Quantum Dots/carbon Nanotubes Electrodes

An Amperometric Glucose Biosensor Fabricated with Pt Nanoparticle-Decorated Carbon Nanotubes/tio2 Nanotube Arrays Composite

Electrochemical Biosensing Platforms Using Phthalocyanine-Functionalized Carbon Nanotube Electrode

An Amperometric Glucose Biosensor Based on Glucose Oxidase Immobilized in Electropolymerized Poly(o-aminophenol) and Carbon Nanotubes Composite Film on a Gold Electrode

Amperometric Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Covalently Immobilized Carbon Nanotube Electrode.

Amperometric glucose biosensor based on carbon nanotubes and platinum nanoparticle modified gold electrode

Biosensor Based on Self‐Assembling Glucose Oxidase and Dendrimer‐Encapsulated Pt Nanoparticles on Carbon Nanotubes for Glucose Detection

Direct Electron Transfer: Electrochemical Glucose Biosensor Based on Hollow Pt Nanosphere Functionalized Multiwall Carbon Nanotubes

A new amperometric glucose biosensor based on platinum nanoparticles/polymerized ionic liquid-carbon nanotubes nanocomposites

A Glucose Biosensor Based on Chitosan–prussian Blue–multiwall Carbon Nanotubes–hollow PtCo Nanochains Formed by One-Step Electrodeposition

Amperometric glucose biosensor based on boron-doped carbon nanotubes modified electrode.

Multifunctional carbon nanotubes for direct electrochemistry of glucose oxidase and glucose bioassay.