Abstract:Electrodeposition of Pt-Pb nanoparticles (PtPbNPs) to multi-walled carbon nanotubes (MWCNTs) resulted in a stable PtPbNP/MWCNT nanocomposite with high electrocatalytic activity to glucose oxidation in either neutral or alkaline medium. More importantly, the nanocomposite electrode with a slight modification exhibited high sensitivity, high selectivity, and low detection limit in amperometric glucose sensing at physiological neutral pH (poised at a negative potential). At +0.30 V in neutral solution, the nanocomposite electrode exhibited linearity up to 11 mM of glucose with a sensitivity of 17.8 microA cm(-2) mM(-1) and a detection limit of 1.8 microM (S/N=3). Electroactive ascorbic acid (0.1 mM), uric acid (0.1 mM) and fructose (0.3 mM) invoked only 23%, 14% and 9%, respectively, of the current response obtained for 3 mM glucose. At -0.15 V in neutral solution, the electrode responded linearly to glucose up to 5 mM with a detection limit of 0.16 mM (S/N=3) and detection sensitivity of approximately 18 microA cm(-2) mM(-1). At this negative potential, ascorbic acid, uric acid, and fructose were not electroactive, therefore, not interfering with glucose sensing. Modification of the nanocomposite electrode with Nafion coating followed by electrodeposition of a second layer of PtPbNPs on the Nafion coated PtPbNP/MWCNT nanocomposite produced a glucose sensor (poised at -0.15 V) with a lower detection limit (7.0 microM at S/N=3) and comparable sensitivity, selectivity and linearity compared to the PtPbNP/MWCNT nanocomposite. The Nafion coating lowered the detection limit by reducing the background noise, while the second layer of PtPbNPs restored the sensitivity to the level before Nafion coating.

A glucose biosensor based on electrodeposition of palladium nanoparticles and glucose oxidase onto Nafion-solubilized carbon nanotube electrode

A Pyrrole Quinoline Quinone Glucose Dehydrogenase Biosensor Based on Screen-Printed Carbon Paste Electrodes Modified by Carbon Nanotubes

Amperometric Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Covalently Immobilized Carbon Nanotube Electrode.

Synthesis of Palladium/helical Carbon Nanofiber Hybrid Nanostructures and Their Application for Hydrogen Peroxide and Glucose Detection.

Biosensor Based on Self‐Assembling Glucose Oxidase and Dendrimer‐Encapsulated Pt Nanoparticles on Carbon Nanotubes for Glucose Detection

In situ synthesis of palladium nanoparticle-graphene nanohybrids and their application in nonenzymatic glucose biosensors.

A salivary glucose biosensor based on immobilization of glucose oxidase in Nafion-carbon nanotubes nanocomposites modified on screen printed electrode

Amperometric Glucose Biosensor Based on Integration of Glucose Oxidase with Palladium Nanoparticles/Reduced Graphene Oxide Nanocomposite

Application of hydrophobic palladium nanoparticles for the development of electrochemical glucose biosensor

Amperometric Glucose Biosensor Based on Palladium Nanoparticles Combined Aligned Carbon Nanotubes Electrode

A glucose biosensor based on direct electrochemistry of glucose oxidase immobilized on nitrogen-doped carbon nanotubes.

Nonenzymatic amperometric sensing of glucose by using palladium nanoparticles supported on functional carbon nanotubes.

Selective and sensitive electrochemical detection of glucose in neutral solution using platinum-lead alloy nanoparticle/carbon nanotube nanocomposites.

Nonenzymatic sensing of glucose using a glassy carbon electrode modified with halloysite nanotubes heavily loaded with palladium nanoparticles

Amperometric glucose biosensor based on carbon nanotubes and platinum nanoparticle modified gold electrode

Multifunctional carbon nanotubes for direct electrochemistry of glucose oxidase and glucose bioassay.

Electrochemical Properties Analysis of Immobilized Glucose Oxidase on Multi-Walled Carbon Nanotubes and Hydroxy-Fullerene Nanocomposites

A Glucose Biosensor Based on Electrocatalytic Oxidation of NADPH at Single-Walled Carbon Nanotubes Functionalized with Poly(nile Blue A)

Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Carbon Nanotubes and Immobilizing Enzyme with Chitosan-Sio2 Sol-Gel

A Glucose Biosensor Based on Chitosan–prussian Blue–multiwall Carbon Nanotubes–hollow PtCo Nanochains Formed by One-Step Electrodeposition

Fabrication of A Novel Glucose Biosensor Based on Pt Nanoparticles-Decorated Iron Oxide-Multiwall Carbon Nanotubes Magnetic Composite